Idler Hub Assembly with 6 on 5-1/2 Bolt Pattern for Timbren Axle-Less Trailer Suspension System
Question:
Thank you so much for your help. One last question: If I wanted to go with a lighter duty setup and use the Timbren ASR1THDS03 2200lb axles with the Provider TA37VR wheels and tires, then which hubs would I need?
asked by: Orice C
Helpful Expert Reply:
To fit the Provider ST225/75R15 Radial Tire w 15" Steel Mod Wheel # TA37VR to the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle # ASR3500S06 you need the Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K. This comes with bearings, seals, EZ Lube grease cap, and lug nuts. Please note this is sold in a quantity of 1 so you need to order 2 for the Timbren kit you are installing.
I have attached some videos for you to check out as well.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Provider ST225/75R15 Radial Trailer Tire w/ 15" Black Mod Wheel - 6 on 5-1/2 - LR D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 225/75-15
- 15 Inch
- M - 81 mph
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Taskmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: What is Overlanding? How to Start your Overlanding Journey
- Q&A: Will Swagman Bike Rack Fit Spare Tire with Hard Plastic Cover
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Q&A: Recommended Hub For Mobile Home Axle That Uses L68149 and LM67048 Bearings
- Q&A: What Causes Trailer Tires to Cup
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Q&A: What is Distance Between Mounting Holes of Dexter A-60 Coupler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Rooftop Cargo Carriers
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
Orice C.
8/9/2019
Thank you so much for your help. One last question: If I wanted to go with a lighter duty setup and use the Timbren ASR1THDS03 2200lb axles with the Contender AC15R45DMM wheels and tires, then which hubs would I need?