What is the Mounting Pattern on the Curt Trailer Hitch Electric Winch Mount Plate

Question

Question:

Will your C31010 Curt Trailer Hitch Electric Winch Mount accommodate a LP8500 Superwinch? I was concerned about the mounting bolt holes and the fairlead holes being spaced properly Thanks , I look forward to hearing from you.

asked by: Mike

0

Expert Reply:

First, on the Curt trailer hitch mount winch mounting plate, the center to center distance between the fairlead mounting holes is 10-1/2 inches. In order to determine if your winch will fit the plate, you will have to compare the mounting hole measurements on the winch to the those on the Curt mounting plate. I have included a picture that shows the dimensions for you.

expert reply by: Michael H

0

click to enlarge

Answer 1

This Curt Trailer Hitch Winch Mount, part #C31010 has a capacity of 9,000 pounds straight pull. You will need to find the weight capacity of the hitch as well, and compare the capacities, using the lowest limiting factor. We do not sell Warn winches,…

view full answer...

Answer 2

From what I was able to find, the Warn M12000 winch is 24.37" L. x 8.45" D. x 11" H. I've attached a picture with the dimensions on the Bulldog Winch Hitch Mounted Winch Plate #BDW20011 but since the mounting cradle is only…

view full answer...

Answer 3

You will need to check the bolt hole mounting pattern of your Badlands Winch, but we do offer several hitch mounted winch mounting plates that may work. First we have the Curt Mounting Plate, #C31010. On it, the first set of mounting holes are 10 by…

view full answer...

Answer 4

The Curt Trailer Hitch Electric Winch Mount Plate #C31010 is not rated for line pull. That rating would be specific to your trailer hitch. Front mounted hitches are often rated in this way but rear mounted hitches are not. I would need to know your…

view full answer...

Answer 5

I checked with my contact at Bulldog and they said that the capacity of the Bulldog Winch Hitch Mounted Winch Mounting Plate #BDW20011, is based on capacity of vehicle receiver. This mount is made for winches up to 12.5 k and does not fit large-body…

view full answer...

Answer 6

The Curt Trailer Hitch Electric Winch Mount Plate #C31010 doesn't have a listed weight rating because the limiting factor is going to be the weight rating of your hitch. I confirmed this with my contact at Curt.

view full answer...

Answer 7

There really isn't a specific width (or thickness) of a winch mounting plate to use with a 12,000 lb winch. You just want to choose one that has a mounting bolt hole pattern that is compatible with your winch. The Bulldog Winch Hitch Mounted…

view full answer...

Answer 8

I went out to the warehouse and pulled a CURT Trailer Hitch Electric Winch Mount Plate, #C31010, to measure it. From the back of the mounting plate to the center of the nearest hitch pin hole, it is 4-1/4 inches. -The distance to the center hole is…

view full answer...

Answer 9

The Bulldog winch mounting plate #BDW20011 will work with most major winch brands. The same goes for Curt mounting plate #C31010. Even if a winch is not listed on the page that doesn't mean it won't fit which is why the hole spacing…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

What is the Mounting Pattern on the Curt Trailer Hitch Electric Winch Mount Plate

Product Page this Question was Asked From

Continue Researching