Replacement Trailer Brake Assemblies for Trailer with 023-106-00 Sticker

Question

Question:

2002 topaz 30’ holiday trailer 6 bolts need right hand brake assembly I’m in Alberta Canada Can get this part in Canada

asked by: Roy

1

Helpful Expert Reply:

The part number on your brake assembly matches our part # 23-106 which is a 12 inch brake assembly for 6,000 lb axles that secures to axles with a 5 bolt mounting flange. We can ship to Canada as well.

expert reply by: Jameson C

1

Answer 1

That appears to be a plug that the wires go through when passing from the inside of the assembly to the outside. It is present so that the wires do not get cut on the metal.

view full answer...

Answer 2

The seal needed is going to depend on the inner and outer bearing numbers stamped into the sides of the bearings. Or if you know the part number of the hub I could look it up to determine the correct seal. The grease seal though is meant to hold…

view full answer...

Answer 3

I spoke with the parts department at Newmar and he told me they only use Dexter brake assemblies on their trailers, so the Dexter 12 Inch Nev-R-Adjust Electric Brake Assemblies, #23-464 (left) and #23-465 (right), should work with your 7,000 lbs…

view full answer...

Answer 4

If the hub/drums are in good shape there's no need to replace them when doing new assemblies like the part #23-465 and #23-464 which are the correct self adjusting brake assemblies for a 7k Dexter axle.

view full answer...

Answer 5

Based on the serial number you provided my contact at Dexter was able to confirm that your axle uses the following components: Inner bearing #14125A Outer bearing #25580 Grease seal #RG06-070 Braking Assemblies Left #23-464, and Right #23-465 Hub and…

view full answer...

Answer 6

Yes, so long as your 6,000 lb Dexter axle has a 5-bolt brake mounting flange (which it should), then you can use the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs #23-465. If you also need the left hand side…

view full answer...

Answer 7

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

view full answer...

Answer 8

I recommend taking a look at the Curt Multipurpose Ball Mount #D210. This is a unique ball mount that features a standard ball mount platform on the bottom and a 2 inch receiver at the top. Because of its design, this multi-purpose adapter will only…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 12

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Replacement Trailer Brake Assemblies for Trailer with 023-106-00 Sticker

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching