Is There a Boat Winch With a Remote

Question

Question:

Thanks for the information. Have decided can go with the Fulton XLT F500620 but would like to know if it has a weather cover for when not in use and if can get a second wireless remote when I order. Thanks for addressing my concerns.

asked by: Carl

0

Expert Reply:

There is not currently a boat winch with a wireless remote we offer, though the Dutton-Lainson StrongArm Electric Trailer Winch # TW4015 you referenced comes with a handheld remote and there isn't an option for a wireless remote with this particular winch.

This winch can be mounted with Quick Mount Kit for StrongArm Electric Winches # DL70309 for the hardware, and can use Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059.

If you have a narrow winch stand the StrongArm will fit so long as you use the Mounting Adapter Plate for StrongArm Electric Winches # DL24055.

I have added links to a number of video reviews for you to check out as well.

expert reply by: Kyle S

0

Carl

5/17/2019

Thanks for the information. Have decided can go with the Fulton XLT F500620 but would like to know if it has a weather cover for when not in use and if can get a second wireless remote when I order. Thanks for addressing my concerns.

Reply

Kyle S.

5/17/2019

The now-discontinued Fulton XLT Powered Winch with Rugged Strap F500620 does not have a second remote control that can be added. And while this winch does not have a cover made for it, I do have a weatherproof cover that will work, the Storage Cover # 333-0010. This is actually designed for a generator, but the Fulton XLT measures 14" long x 10" wide x 6-1/2" tall and the storage cover is 18-7/8" long x 11-3/4" wide x 15-3/8" tall so it will fit over this winch and has a drawstring to tighten it, although it is of course taller by a number of inches. The only other option that might work is the Bulldog Winch Cover # BDW20046 which is 21" long x 8" x wide x 11" tall. While it does not have as much width as the Fulton XLT winch, its added length should allow it to fit over the winch.

Reply

Answer 1

You could use a 25' x 2" strap like part #DL24249. The maximum power draw of the Dutton-Lainson #TW4015 StrongArm winch is 40 amps, which would blow the fuse/circuit breaker on the 12-V feed to the 7-way of most vehicles, which is…

view full answer...

Answer 2

The brown wire of your trailer wiring would be the one that carries the running light circuit. That would be the correct circuit to use for powering the CE Smith Post-Style Guide-Ons #CE27740. I attached an install video for this product for you to…

view full answer...

Answer 3

If the Dutton-Lainson Electrical Quick Connect #DL24086 for your Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 gets wet when launching and loading your boat you should disconnect the circuits to protect them from damage in the water.…

view full answer...

Answer 4

If you wired the CE Smith Post-Style Guide-Ons #CE27740 that you referenced to the stop/turn signal of your trailer wiring they would blink with the blinkers and come on with the brake lights. There's no reason you couldn't do that…

view full answer...

Answer 5

We actually have a product that does exactly what you are looking to do. Check out the CE Smith Guide Ons part #CE27740. These are guide-ons that have LED lights on the tops of them for increased visibility. The PVC of this kit would be strong enough…

view full answer...

Answer 6

The best option we have for your application is the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015. This has a 1,500 lb capacity rating, a cable, free-spooling drum, and a remote. The remote is wired, but it does allow you to move up to 10…

view full answer...

Answer 7

The mounting adapter, #DL24055, was designed for Dutton-Lainson StrongArm winches so I cannot say if it will fit your Powerwinch model 912 or not. I can tell you the mounting hole pattern and you can compare that with your winch. I made a picture…

view full answer...

Answer 8

You do have a few options to get an electric winch, like the Dutton-Lainson StrongArm #TW4015, working, but the 4 Flat will not be able to do so alone. The first will be to add a battery to the trailer. This will usually be my suggestion, but as you…

view full answer...

Answer 9

The type of battery you are looking for to use with the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 is just going to be a 12 volt battery rated for a minimum of 40 amps, and this is going to be a standard vehicle battery. There are so…

view full answer...

Answer 10

I wouldn't recommend using a jumper box for long term use as you may over heat it but there are quite a few people who have used them with winches like the Dutton Lainson StrongArm #TW4015 and it worked well.

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Is There a Boat Winch With a Remote

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching