Ball Mount With 4-1/2 Inch Rise for 2 Inch Trailer Hitch
Question:
ball mount rise. hello, I need a 4.5 inch rise from receiver to coupler, what do you recommend? thank you
asked by: Scott J
Expert Reply:
For a ball mount with exactly a 4-1/2" rise you will need the Curt Dual Length Ball Mount # C45240.
This ball mount has two hitch pin holes so you can use it with different lengths, either 9-1/4" or 12-1/4". It fits a 2" trailer hitch and has a 6,000 lb towing capacity and 600 lb tongue weight capacity when used in the rise position.
For a hitch ball you can use 2" Hitch Ball # 63845 or 2-5/16" Hitch Ball # 63847, depending on the size of the ball your trailer's coupler accepts.
You can secure the Curt Ball Mount # C45240 to your hitch with Trailer Hitch Receiver Lock # e98880 or simply use Pin and Clip # C21500.
I added a link to a video review of the ball mount for you to take a look at.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Curt Dual Length Ball Mount for 2" Hitches - 4-1/2" Rise, 5-3/4" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Best SumoSprings For 2023 Toyota Tacoma TRD For Towing & Load in Truck Bed
- Q&A: What is the Ideal Height for a Ball When Towing a U-Haul Trailer?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Correct Floor Mats for a 2019 Jayco Redhawk 25R
- Article: Rooftop Cargo Carriers
- Q&A: Comparing Leaf Help Springs And Jounce Springs For A 2023 Toyota Tacoma 4WD
- Article: Steel vs. Aluminum Ball Mounts
- Q&A: Will Installing Trailer Hitch on 2019 Ford Edge Titanium Stop Hands-Free Liftgate From Working
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Article: Determining Trailer Tongue Weight