Installing Gen-Y Stabilizer Bar 325-GH-0100 on 1999 Suburban Without Frame Access
Question:
I bought the 325-GH-0100 stabilizers with the 15-inch Gen-y hitch, to put on my 1999 K2500 Suburban LT. It has a 6-inch suspension lift and 3-inch body lift, and 37-inch tires. It has what I believe is a class-IV hitch frame. I dont see a good place to attach the stabilizers to the hitch frame or truck frame, because the hitch frame embraces the gas tank, and the tail pipes run along the outside of the hitch frame. Need some thoughts on what might work.
asked by: Ken S
Expert Reply:
The Gen-Y Stabilizer Bar Kit for Gen-Y Adjustable Ball Mounts # 325-GH-0100 give you a bar length adjustment range of 24- to 33-inches which works for most installations. The bar ends have to be affixed to the vehicle's frame for them to properly do their job of stabilizing the ball mount. They really won't do much if attached to the hitch. The further away the frame mounting point is from the hitch the better the system works.
If there is no available spot on the frame for the bar mounts to be bolted or welded on then the only way around this is to add material, welded to the frame. For recommendations on this process I suggest sending a number of photos to Gen-Y. Their team was just recently here at etrailer and they're really nice folks that are happy to help owners get their products installed safely and effectively.
Product Page this Question was Asked From
Adjustable Stabilizer Bar Kit for Gen-Y Adjustable Ball Mounts with 2" Receivers
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Stabilizer Bars
- Gen-Y Hitch
more information >
Continue Researching
- Shop: Kenda Karrier ST225/75R15 Radial Tire with 15" Black Galvstar - 6 on 5-1/2 - Load Range D
- Shop: Adjustable Stabilizer Bar Kit for Gen-Y Adjustable Ball Mounts with 2" Receivers
- Video: Review of Gen-Y Hitch Adjustable Ball Mount Stabilizer Bar Kit - 325-GH-0100
- Video: InfiniteRule Gen-Y Ball Mount Locks Review
- Shop: Karrier ST225/75R15 Radial Trailer Tire w/ 15" Modular White Wheel - 6 on 5-1/2 - Load Range D
- Shop: Trailer Hitch
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 16K
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 12-1/2" Drop - 16K
- Shop: InfiniteRule Lock Set for Gen-Y 10K and 16K Adjustable Ball Mounts for 2-1/2" Hitches - Qty 3
- Video: Gen-Y Anti-Rattle Clamp Review GY28XR
- Search Results: anti rattle clamp
- Search Results: dexter ez lube grease caps
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Article: My Trailer Hitch Doesn't Fit
- Shop: Front Mount Hitch
- Video: Hollywood Racks 2 Inch Hitch Lock Review
- Video: Review of B and W Trailer Hitch Ball - Raw Steel 2-5/16 Inch Hitch Ball - BWHB94004
- Video: Master Lock Trailer Hitch Receiver Lock Review
- Shop: Towing Mirrors
- Q&A: Is Hitch Stabilizer Needed When Using Gen-Y Adjustable 2-Ball Mount In 12-1/2 inch Drop Setting
- Q&A: Compatibility of Stacked Receiver Ball Mounts with Weight Distribution Systems
- Q&A: How to Install Gen-Y Adjustable Stabilizer Bar 325-GH-0100
- Search Results: 34061071~d
- Search Results: 34061072~d
- Search Results: trailer hitch lock
- Search Results: gen~y hitch
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Receiver Adapter Compatible with 13 Inch Difference in Height for Tow Bar and Bike Rack
- Shop: Suspension Enhancement