Front Hitch Recommendation for 2014 Winnebago Aspect Ford E450 Chassis

Question

Question:

Hello, Do you carry a front hitch for a 2014 Winnebago Aspect Ford E450 chassis? Thanks

asked by: Stephen C

0

Expert Reply:

Yes we do carry a front hitch that fits your 2014 Winnebago Aspect Ford E450 chassis. For that you'd want the Draw Tite hitch part # 65053 which is a confirmed fit.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Most RV bumpers have a plastic plug on each end, so the interior of the bumper can be used for storage. You should be able to remove the plug and look inside the bumper to see how the seam is welded, one continuous weld or a series of spot welds. A…

view full answer...

Answer 2

We offer several choices in spare tire carriers for 2-inch hitches like the one on your 2017 Winnebago Travato. None of these folds, however. A folding mechanism would severely reduce the carrier's rigidity and this is the main reason such…

view full answer...

Answer 3

The critical elements in finding a replacement vent lid are matching the overall size, the position of the lift arm bracket and the style of the hinge. I was unable to find a part number 20X14058A , but we do have some options that will work for…

view full answer...

Answer 4

There is a front-mounted hitch that is a fit for your 2017 Winnebago built on a Ford E-450 chassis, the Draw-Tite #65053. It is a bolt-on installation that comes with the necessary hardware for install.

view full answer...

Answer 5

The 2015 E450 is only produced as a chassis or a cutaway van chassis, so I assume you're speaking of a RV on a van chassis. The Draw-Tite #65053 is a fit for the 2015 E450. I've confirmed this with Draw-Tite.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...