Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
Question:
Fleetwood Neon Curious what is needed to convert my offroad trailer to your system, it already has an SOA conversion with hubs that fit jeep rims.
asked by: John B
Expert Reply:
To convert your offroad trailer to the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 you will either use a crossbrace for your trailer frame at the axle location or you will add a 2 inch square tube between the assemblies (not included) into the integrated holes of the assemblies. This will give you much more ground clearance than a standard axle and will also include the suspension needed.
Unfortunately that 5,200 lb Timbren system will not work with Jeep rims based on the spindle size, so you would either need a lesser capacity axle to get your Jeep bolt pattern like the Timbren axle less kit part # ASR2KHDS03 and the hub part # 84550BX. This is my recommendation as it will still surpass the GVWR of your Fleetwood Neon and will allow you to get the look you desire.
Your other option is to keep the higher rated axle and change the wheels. In that instance you can use the Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2 # 8-213-5UC1-EZ and then get wheels that fit that bolt pattern to move your knobby tires to. I've linked the page to your options to assist. If the size won't fit, I've linked combo options as well. If you go this route you will loose some the desired look but it will ride better on the road.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR E
- Shop: Brake Controller
- Shop: Tire Chains
- Q&A: How To Determine Bearings and Seals For Older Long Chih Trailer
- Video: Yakima Recovery Track Mount Review
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Trailer Tire Sizing
- Video: Choosing the Right Trailer Wiring
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Fifth Wheel Hitch
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: equalizer
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Suspension Enhancement
on Trailer Suspension Parts
John S.
3/2/2020
its seven hundred fifty buckaroons per unit adding up to approximately three thousand bucks plus... to do a tandem axel setup - am I correct?The over and above three thousand bucks are added up in the cost of disc brakes, miscellaneous hardware, dilevery costs, and taxes as such to get pretty much everything to do the project dilevered to my shop?