Trailer Hitch Recommendation for 2019 Ford Fusion

Question

Question:

What hitch should I get for my 2019 Ford Fusion?

asked by: Marty

0

Expert Reply:

For your 2019 Ford Fusion the trailer hitch I recommend is the Curt part # C12164 for if you have a Sport model or part # C12091 for if you have a non-Sport model. I recommend these hitches as they are made in the USA and have a concealed crosstube which means they'll be less visible than the other options.

expert reply by: Jameson C

0

click to enlarge

Answer 1

To safely transport your 2 bikes with your 2019 Ford Fusion your best option will be with a trailer hitch and hitch-mounted bike rack. Because of the spoiler you mentioned and overall rear design of the 2019 Ford Fusion, there isn't a…

view full answer...

Answer 2

I recommend Curt Trailer Hitch Receiver part #C12164 which is a confirmed fit for the 2020 Ford Fusion Sport. It is a concealed cross tube so the only portion of the hitch that is visible once installed is the receiver portion for a nice clean…

view full answer...

Answer 3

For the Sport model of the 2017 Ford Fusion you will actually need hitch #C12164. The recommended ball mount for this hitch is #C45016. For a 1-7/8 inch ball use #19257 and for a 2 inch ball use #19258. And for trailer wiring you can use #118574 to…

view full answer...

Answer 4

In regards to a 2017 Ford Fusion, the Curt Trailer Hitch Receiver part #C12164 is a fit for sport models and the Curt Trailer Hitch Receiver part #C12091 is a fit for non-sport models. They are both great bolt-on options that will work well for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 12

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...