etrailer Class III Trailer Hitch Installation - 2022 Ford Escape Video

Technically none of the hitches made for the 2022 Ford Escape are designed to fit the PHEV model. However, we do have a review from a customer who successfully installed the etrailer #e89YR on their 2022 PHEV. They did take this to a local installer…

Yes, it will! The etrailer Hitch item #e89YR has been confirmed to fit the Hybrid model of the 2024 Ford Escape. This hitch is custom fit and bolts to your Escape with included hardware. It has a 2" receiver with a 525 lbs maximum tongue weight…

Hey Ken, we have had customers in the past use the etrailer Trailer Hitch Receiver #e89YR with their Escape Hybrid PHEV. I'm not 100% sure why we have it listed as a no fit, but I'd imagine it's because of the EVAP box, but everything…

With the etrailer #e89YR hitch installed, the receiver tube will block the sensors in the middle of the bumper, but if you wave your foot several inches to the right or left of the receiver, the sensors will pick up the movement and operate the…

There are 2 different Curt T-Connector Vehicle Wiring Harness for your 2022 Ford Bronco as one is compatible with LED tail lights while the other is for models with incandescent tail lights. For LED tail lights you will need the Harness #C42WR. For…

Yes, we do. I recommend Curt, part #C13406. It's a fit for all of the 2018 RAV4's including the Hybrid model like you have. I like how the crosstube is hidden behind the RAV4's bumper and all you see is the receiver tube sticking out.…

Though I would not be able to speak for anyone else I believe that what you saw was probably referring to connecting the 12 volt hot lead to the auxiliary battery on a hybrid. However, it is strongly recommended when installing Vehicle Wiring Harness…

The Hopkins 4-pole harness we offer for your RAV4 is part #HM11141820 and this installs by plugging in at your taillight wiring connectors and via a single 12V power wire connection at your vehicle battery. If your vehicle taillights failed after…

The 1 Bike Add-On #KU57FR allows you to add an additional bike to the Kuat Transfer V2 Bike Racks 1-Bike #KU64FR, 2-Bike #KU84FR or 3-Bike #KU24FR racks. The 1-Bike Add-On TSAOB is for the previous V1 version of the Kuat Transfer. The mounting…

We do have a trailer hitch confirmed to fit all models of the 2020 Ford Escape, including the Hybrid - the etrailer Class III Hitch Receiver #e89YR. This has a 2 inch receiver and a tongue weight capacity of 525 lbs, perfectly suitable for a bike…

The instructions for the Curt Trailer Hitch Receiver #C76HR provide a diagram showing where to trim the fascia. There is no actual template to follow, so correctly marking and cutting the fascia is ultimately up to you. Looking at the installation…

I suggest the Curt Trailer Hitch Receiver, #C23FR. This is a Class III - 2", custom fit hitch designed specifically for the Ford Escape. This bolt-on installation comes complete with needed hardware kit and installation instructions included.…