Replacement M6 x 65 Carriage Bolt for Thule Hull-A-Port Kayak Carrier

Question

Question:

M6 X 65 Bolts Thule Hull a Port Do you carry that bolt or do I need to order a M6 X 80?

asked by: David

0

Expert Reply:

We do indeed have the replacement M6 x 65 carriage bolt for your Thule Hull-A-Port Kayak Carrier with part # 915-066-554. This is exactly what you need.

expert reply by: Chris R

0

Answer 1

It sounds like you have the Thule Hull-A-Port, #TH834, which should fit the Yakima round bars. The Yakima round bars are only 1/4 inch taller than the Thule bars. But if it is not working then you would need longer bolts. The Hull-A-Port originally…

view full answer...

Answer 2

For your Thule Summit Cargo Box, the correct mounting hardware kit is the QM3 Quick Mount Hardware #TH04997. This kit includes all of the needed mounting hardware to attach the Thule Summit to the crossbars on your vehicle's roof. We do also have…

view full answer...

Answer 3

It looks as if you have an older fairing, and not the Thule AirScreen, so the #8528583001 would not be compatible. For the fairing you have (judging by what little I can see in the photo you provided), you'd need the #8537361 clips.

view full answer...

Answer 4

It depends on your bike mount and brand. Yakima has their Universal Mighty Mounts #Y03590 that should help with most of your Yakima carriers. Thule has their Xadapt series: #Xadapt1 and #Xadapt2 for crossbars that have a t-track in them. If not, they…

view full answer...

Answer 5

Sounds like the #THXADAPT3 is exactly what you need. This comes with 8 M6 bolts that are 80 mm long that are designed to let a Thule Hull-A-Port Kayak Carrier #TH834 install on taller crossbars like it sounds like you have.

view full answer...

Answer 6

I went and pulled a #THXADAPT9 from our warehouse to get the dimensions you asked for and the square holes are 1/4 inch by 1/4 inch and are 4 inches apart on center. This only includes one bracket.

view full answer...

Answer 7

The Replacement M6x50 Carriage Bolt for Thule Carries measures 50 mm long or 1.97 inches long. I did find a M6 carriage bolt, Thule #915-068-054, that measure 80 mm or at 3.15 inches long. This is the only bolt that Thule offers.

view full answer...

Answer 8

The replacement bolts you need are part #915-068-054 for your Thule Hullaport TH835PRO. Then for the buckle protector you'd need the part #853-5593.

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Replacement M6 x 65 Carriage Bolt for Thule Hull-A-Port Kayak Carrier

Product Page this Question was Asked From

Continue Researching