How Does Air Line Connect to Elbow and Tee Fittings

Question

Question:

What do i need to secure airline to the T and the L Please help Thanks.

asked by: Homer H

0

Expert Reply:

I went out to the warehouse to confirm and the 1/4" air line in the Air Line Service Kit for Firestone Ride-Rite/Sport-Rite Air Helper Springs # F2012 will fit directly into the tee and elbow fittings that come with the kit. You do need to ensure you push line enough so that it "catches" in the fittings.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The valve core can sometimes get stuck inside the valve stem due to corrosion build-up or being inserted incorrectly. This would then mean you could not put air in or take air out of the system. The good news is that this is pretty easy to fix and…

view full answer...

Answer 2

The Firestone Ride-Rite kit #F2525 is designed to fit the 2014 Ford F-150 and it will fit 4-wheel drive models but not the SVT Raptor or FX2 models. The FX4 model should not be a problem. The distance from the outside of the truck frame to the inside…

view full answer...

Answer 3

Yes, all of the Firestone Ride Rite air suspension systems use 1/4 inch tubing and 1/4 inch NPT fittings like the #F2012 that you referenced. This kit includes 18' of red 1/4" air line, (2) 1/4" NPT (National Pipe Thread) elbow…

view full answer...

Answer 4

Both the Firestone Level Command II with Standard Duty Compressor part #F2158 and the Firestone Level Command II with Heavy Duty Compressor part #F2219 would technically work with the Firestone Air Bag Kit part #F2535 that you have installed on your…

view full answer...

Answer 5

Drilling is not required to install Firestone Ride-Rite kit #F2560 on a 2014 Ram 3500. There are many compressor options that you could use. I recommend Level Command kit #F2219. This is a dual-function kit with heavy duty compressor. It will allow…

view full answer...

Answer 6

After a few moments of looking over the instructions provided by Firestone and comparing them to the video, I realized that in the printed instructions, the connections to the relay are not shown which is what is leading to your confusion. There are…

view full answer...

Answer 7

Compressors like the Firestone Air Command II #F2219 shouldn't take an experienced mechanic long at all. I'd say most would charge you right at 2 shop hours to pull off the install but the specific application can vary. The most time…

view full answer...

Answer 8

The reason why the Level Command II, #F2219 has an inflate and deflate button on each side is because, it is designed to allow you to adjust each air bag independently of the other. This feature for drivers that frequently carry various types of…

view full answer...

Answer 9

There are a few things you can check to see why you are not getting power from your relay to your compressor. The first and easiest thing to check is to make sure you have a good ground connection from your gauge. If the ground wire is not attached…

view full answer...

Answer 10

You can use the Replacement Air Line Kit for Air Lift AirLift 1000 - Rear #AL22007 you asked from or #F2012 to get a new Schrader valve, but it sounds like you just need the valve. I recommend using the Firestone Inflation Valve for 1/4" Tubing…

view full answer...

Answer 11

To take air out of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 on your 2016 Chevrolet Silverado 2500 it is the same process as with valve stems on a tire. I recommend using the Bulldog Winch Tire Inflator with Air…

view full answer...

Answer 12

For your Firestone Ride-Rite Air Suspension system, on your 2008 Forest River Lexington Motorhome, we have the: -Replacement Brass Inflation Valves #F3467 with the bracket #F98ZR. This is also apart of a kit that you can use instead: -Air Line…

view full answer...

How Does Air Line Connect to Elbow and Tee Fittings

Product Page this Question was Asked From

Continue Researching