Recommended Trailer Hitch Receiver and Wiring for 2011 Honda Accord Sedan
Question:
This is for a 2011 Honda Accord Sedan?
asked by: Billy
Expert Reply:
The Curt Trailer Hitch Receiver - Class I - 1-1/4" # C11085 is a fit for the 2008-2012 Honda Accord Sedan or Coupe models. For a ball mount I recommend # C45521 along with pin and clip # F-4. Then you simply need to add the hitch ball like # A-82 for a 2 inch option or # A-80 for a 1-7/8 inch diameter option.
Then for your trailer wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55502. This custom-fit T-connector plugs into your Honda Accord's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is Ground Clearance on a 2008 Honda Accord Lost with Hitch Installation
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Q&A: Difference Between 2 Curt Trailer Hitch Receivers that Fit the 2009 Honda Accord
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Best Replacement Wheel and Tire Combo for a Jet Ski Trailer
- Q&A: Can Tire Size be Increased on Jet Ski Trailer with 2" of Tire-to-Fender Clearance
- Q&A: Recommended Receiver Hitch to Carry 2 Bike Rack on 2010 Acura TL
- Q&A: Visibility of Hitch After Mounted on a 2009 Honda Accord 4 Door
- Article: How to Choose the Right Trailer Hitch Class
- Article: Hitch Adapters and Extenders
- Article: Best Bike Racks for Electric Bikes
- Article: Calculating Portable Generator Power Needs
- Article: Trailer Hitch Receiver Sizes