Replacement Brake Kit Recommendation for 2000 Rockwood Premier 2317G Pop Up
Question:
hi - I need to replace the trailer brakes on my 2000 Rockwood Premier 2317g popup camper. Do you know what size brakes I would need? Thanks
asked by: Nick
Expert Reply:
From my research the Rockwood likely has a 3,500 pound axle and therefore uses 10 inch brakes. The 10 inch brake assemblies I recommend for you (And almost always recommend) are # AKEBRK-35-SA. These are self-adjusting so after the original set up they won't need to be adjusted again. Both the left and right hand side are included, and labeled to make installation easier. Also the mounting bolts are included but you'll need the nuts and lock washers, part # BRKH10B.
Our most popular hub and drum assembly for 3,500 pound axles that includes the bearing kit is # AKHD-545-35-EZ-K. It's for E-Z Lube spindles that have a grease zerk. If your spindles don't have the grease zerk use # AKHD-545-35-K with Bearing Buddy # BB1980A instead.
The hubs have a 5 on 4-1/2 bolt pattern and use inner bearing # L68149 and outer bearing # L44649. If these bearings or bolt pattern aren't what you currently have then the hubs are incorrect. In which case let me know what you do have and I'll recommend the correct parts for you.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Most Popular Wheel Bearings
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Q&A: Recommended Trailer for Two Titan Propel 12 Kayaks
- Q&A: How to Wire a 6 Pole Round Trailer End Plug