Weight Distribution Shank for 2-1/2 Inch Trailer Hitch Receiver with More Drop
Question:
I bought a new 2500 Ram and it needs the 2 1/2inch square for our equalizing hitch assembly. Also, we would like to have 4-5 inches more drop than the one that came with our equalizing hitch assy. I have looked at your EO90-02-4800, and it looks like one needed, but would like one with about 9inch drop. The vertical part on the hitch adapter piece needs to be 2inch Is there any hope of finding one of these? Thanks
asked by: Michael A
Expert Reply:
For your 2-1/2 inch trailer hitch receiver, the shank with the most drop is the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop # EQ90-02-4900. This will give you 2 inches more drop than the # EQ90-02-4800 you referenced.
Depending on your system you may alternatively be able to use a shank like the Reese Weight Dist Shank - Drop Only - 11" Long - 7-5/8", 8-5/8" Drop # RP3344 with a sleeve reducer like # 325-GH-007. This is not ideal but in some cases can work depending on the hitch capacity and the weight distribution system used.
Products Referenced in This Question
Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- Gen-Y Hitch
more information >
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1200 lbs TW
- 12000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 6 Inch Drop
- Square - 10 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Converting Your RV Water Heater to Tankless
- Q&A: What Does E6 Furrion Thermostat Indicate
- Q&A: Does Fresh Water Tank Need to be Full When Adjusting Equal-i-zer 16k Weight Distribution Hitch
- Q&A: Is Equal-i-zer Shank EQ90-02-4900 Same as 90-02-4325
- Q&A: 2-1/2 Inch Weight Distribution Shank for a EAZ-Lift Weight Distribution System
- Q&A: Is It Safe to Tow Cross Country Using a 2-1/2 to 2 Reducer Sleeve
- Q&A: Weight Distribution System Compatible With Lifted Truck
- Q&A: Weight Distribution Shank that Allows Truck Tailgate to Fold Down
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps