Can a BMW R1200RT Motorcycle be Carried on DK2 5x7 Utility Trailer Using a Wheel Chock and Straps
Question:
Is it possible to install a motorcycle chock to bed of DK2 5x7 utility trailer and safely carry a BMW R1200RT motorcycle approx. 600lb.? If so, which chock and tie-downs would you recommend?
asked by: Mert
Expert Reply:
Yes you could mount a chock such as Rack'Em Manufacturing Removable Wheel Chock # RA-17 to the deck of the K2 trailer # K2MMT5X7 and then use it to transport your BMW motorcycle. I do recommend getting a steel sheet up to 1/8 inch thick to use as a backing plate to disperse the force applied to the chock over a larger area. It would go on the under side of the deck. The Rack'Em chock will work for tires up to 6-1/2 inches wide.
For tie downs ShockStrap has a set of 4 straps specifically for motorcycles, # 297-7RSBB-M. With the built in shocks these straps won't accidently slip off.
Or you could use strap set # 06303 combined with traditional ratchet straps such as # 317-340720.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
1" x 18" Tie-Down Motorcycle Assist Straps (Qty 2)
- Accessories and Parts
- Tie Down Straps
- Ratchet Straps
- Protective Gear
- Soft Loops
- Erickson
more information >
ShockStrap Ratchet Motorcycle Tie-Downs w Shock Absorbers - 1-1/2" x 7' - 1,000 lbs - Qty 4
- Motorcycle Tie Down Straps
- Trailer
- Truck Bed
- S-Hooks
- Soft Ties
- 4 Straps
- Manual
- 6 - 10 Feet Long
- Ratchet Strap
- 1-1/8 - 2 Inch Wide
- 3501 - 6600 lbs
- ShockStrap
more information >
ProGrip Ratchet Tie-Down Straps - Double-J Hooks - 1-1/2" x 15' - 1,333 lbs - Qty 2
- Ratchet Straps
- Trailer
- Truck Bed
- Double-J Hooks
- 2 Straps
- Manual
- 11 - 20 Feet Long
- 1-1/8 - 2 Inch Wide
- 1201 - 1500 lbs
- ProGrip
more information >
Rack'Em Manufacturing Removable Wheel Chock
- Wheel Chocks
- Wheel Chock
- Motorcycle
- Steel
- Single Chock
- Gray
- RackEm
more information >
Product Page this Question was Asked From
Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs
- Trailers
- Utility Trailers
- Platform
- 1640 lbs
- TIlt Bed Frame
- Cargo
- Wheeled Equipment
- 4W x 7L Foot
- Powder Coated Steel
- Detail K2
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Measure to Determine the Correct Grease Seal for a Trailer Spindle
- Q&A: What Type Of Grease Is Required for the Detail K2 Trailer Ki
- Q&A: Recommended Small Utility Trailer for Highway Use
- Article: Trailer Maintenance Schedule
- Q&A: What Are The Dimensions Of The Two Ends On The Yakima Tongue Extension # Y08109
- Q&A: Will 18 Foot Hobie Kayak Fit Malone MicroSport Trailer MPG460G
- Q&A: Which Bearing Buddy Fits the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How Often Does Galeo Pro GPS Tracking Device Send Location Updates
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Hitch Receiver Sizes
- Article: How to carry Bikes on a Vehicle