Adjustable Ball Mount Recommendation for a 2007 Ford Expedition
Question:
I have a 2007 Expedition 4x4 with Class III hitch. What should the be as I have a boat and rent trailers to move items.
asked by: Charles C
Expert Reply:
With ball mount # 2753, you can use hitch ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63847 (2-5/16 inch diameter).
To determine the right size ball mount and ball, you would normally take some measurements as outlined in our ball mount FAQ article which I have linked for you to view. Since you will be towing more than one type of trailer, a good investment would be an adjustable ball mount.
The Curt multi-ball adjustable ball mount, part # D900, covers all three ball sizes, each with a different capacity. It has a maximum drop of 5-3/4 inches, and a maximum rise of 5-3/4 inches. If you need more drop or rise, I have included a link to our adjustable ball mounts for 2 inch trailer hitches main page for you to view.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: What is Overlanding? How to Start your Overlanding Journey
- Q&A: Selection of Special Trailer Tires for 5th Wheel Trailer to Avoid Blowouts
- Q&A: Solution for Suspension Sag on 2016 Toyota Highlander Towing Trailer
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Q&A: Recommended Hub For Mobile Home Axle That Uses L68149 and LM67048 Bearings
- Article: RV Cell Boosters, How Do They Work?
- Q&A: Will Swagman Bike Rack Fit Spare Tire with Hard Plastic Cover
- Q&A: Replacement Grease Seal 225255UC for 2015 Wesco Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)