Brake Controller and Hitch Recommendation for 2010 Dodge Ram 1500

Question

Question:

I have a 2010 Dodge Ram 1500 and it doesnt have hitch receiver installed. Ive learned through your videos on youtube and your website that product #13333 is the way to go as I intend on buying a travel trailer in the near future approx 20-24foot in length. A couple questions: 1 Do I need to install a brake controller? And if so, which one? 2 Can you provide a list of items that Ill need with suggested product numbers i.e. ball mounts, hitch ball, etc., and anything else for somebody new to the trailer world. Truly appreciated.

asked by: Sean V

1

Helpful Expert Reply:

A travel trailer that's 20-24 feet in length is going to have brakes on it that will need to be activated when towing so you'll need a brake controller.

For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

The correct install harness for this controller in your 2010 Dodge Ram is the part # 3021-P.

The hitch part # 13333 that you referenced is also a great option to that would work well.

Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

expert reply by: Jameson C

1

Answer 1

The Curt hitch part #13333 is rated for use with weight distribution systems. This hitch has a capacity of 6,000 lb trailer weight without a WD system and then with a WD system is rated for up to 10,000 lbs. Either way it would have capacity for a…

view full answer...

Answer 2

If the rear end of your vehicle sags significantly when the trailer is hooked up then you could have an unsafe condition and your front end and tires will not wear properly. The weight is taken off of the front wheels of the vehicle and can cause…

view full answer...

Answer 3

For your 2018 Ram 1500 Express, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center #41948. This is a Class V hitch receiver with a 2 inch receiver opening. It is rated for 1500 lbs tongue weight and 12,000 lbs towing and even…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #13333 referenced in your question is confirmed to fit your 2004 Dodge Ram 1500 as long as you replace what you have with the standard OEM bumper. The Curt hitch is going to attach to the truck's factory bumper…

view full answer...

Answer 5

It is not required that you install a weight distribution system for your Jayco Featherlite Trailer, but one will certainly be beneficial for any trailer that weighs more than 50 percent of the tow vehicle. This is the case with the 3,200 GVR on your…

view full answer...

Answer 6

For your 2016 Ram 1500, you can install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 using the Tekonsha Plug-In Adapter, #3024-P. One end of this custom adapter will plug directly into the built-in port beneath the dash of your vehicle and…

view full answer...

Answer 7

It sounds like you are just looking for a replacement 7-way connector to replace the factory connector on your 2018 Ram 1500, and we have exactly what you need: - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug…

view full answer...

Answer 8

I spoke with my contact at Tekonsha and he stated that when the 2 blue dots occur and will not shut off you will need to reset the controller. What you will do is unplug the harness from the back of the controller and let it sit of at least 30…

view full answer...

Answer 9

To install the excellent Tekonsha Prodigy P2 Trailer Brake Controller #90885 on your 2019 Ram 1500 you just need the Plug-In Wiring Adapter #3024-P. The factory brake controller port should be located underneath the dash, above and in front of the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Brake Controller and Hitch Recommendation for 2010 Dodge Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching