Additional Base Plate for the Rack'em Manufacturing Removable Wheel Chock Part # RA-17

Question

Question:

I would like to buy a RA-17 wheel chock and an additional base plate. What is the part # for a extra base plate

asked by: David H

0

Expert Reply:

The part number for the base plate used in the Rack'em Manufacturing Removable Wheel Chock part # RA-17 is the Steel Replacement Base part # RA-17B. Please keep in mind that this is the base plate only and you will need to supply your own hardware in order to secure the base plate to your trailer.

expert reply by: Conner L

0

Answer 1

We haven't had anybody confirm a fit for a Spyder hauler, but I can confirm that the highest point of the Rack'em Wheel Chock #RA-17 from the ground is 8-9/16". If you measure from the ground to your fender you will be able to tell if it…

view full answer...

Answer 2

The overall dimensions of the Rack'Em Manufacturing Removable Wheel Chock #RA-17 are 10-1/2" wide x 10-1/4" long. It measures 8-9/16" from the base to the top of the chock and fits tires up to 6-1/2" wide.

view full answer...

Answer 3

The fat tire straps for the Kuat NV 2.0 #BA22B can only accommodate tires up to 5" so the 6-1/2" tires won't work with this bike rack. Since none of the bike racks are going to be able to fit those tires, I recommend the etrailer…

view full answer...

Answer 4

I checked with Erickson and their Removable Motorcycle Wheel Chock item #EM07506 does not have a weight rating. It is made of steel and works with bikes that have up to 6" tires. So long as your Honda and Kawasaki do not have wider tires this…

view full answer...

Answer 5

Hey Joel, we have bike racks that will work for you but the Inno bike rack part #IN25RR only fits up to 3-1/2 inch wide tires. The Kuat Piston Pro bike rack part #KU66ZR would work great as it can fit a bike tire width up to 5 inches.

view full answer...

Answer 6

The kit that you ordered #391TES317T comes with the stealth hitch towing kit #391CONVB7. This is a hardwire kit just as shown and stated on the part page. The wiring kit is made specifically for the Tesla Model 3 2017-2023 so it will work nicely for…

view full answer...

Answer 7

The Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is an excellent choice to tow any trailer that has between 1 to 3 axles (6 brake assemblies). The main feature is the control knob that mounts in dash or other easily accessible area, it…

view full answer...

Answer 8

I would be happy to help you set your 2022 Jeep Gladiator for flat towing. You're going to need a base plate kit, a tow bar, tow bar wiring, supplemental braking system, protective screen, charge line, stop light switch, and a high/low adapter. I…

view full answer...

Answer 9

In order to use the Yakima HoldUp EVO 2 Bike Rack for 1-1/4" Hitches #Y02480 with a 2" trailer hitch receiver you will actually need to swap out the current tongue with part #8880826. The HoldUp doesn't have provisions for an adapter…

view full answer...

Additional Base Plate for the Rack'em Manufacturing Removable Wheel Chock Part # RA-17

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching