What Size Bolts are Used to Install the CargoBuckle G3 Retractable Ratchet Tie-Down Straps

Question

Question:

I am going to purchase a set of #IMF18800 ratchet straps. I am wondering what the hole diameter is in the ratchet so I can pre drill the holes this weekend, what size are the mounting bolts are provided

asked by: Paul A

0

Expert Reply:

The mounting bolts that come with the CargoBuckle G3 Retractable Ratchet Tie-Down Straps # IMF18800 are 3/8" diameter x 1-3/4" long.

I have attached a review video of these straps for you to check out as well.

expert reply by: Jon G

0

Answer 1

The best mounting location of Tie Down Strap part #IMF18800 will really depend on what you are carrying. Generally speaking, mounting one tie down at each corner of the bed would allow for the most flexibility. Each strap can safely handle a load of…

view full answer...

Answer 2

You can mount the CargoBuckle G3 Retractable Ratchet Tie-Down Straps #IMF18800 in virtually any position as long as you are able to drill the hole for the 3/8" bolt. Most likely opt to attach the strap to the main frame as it is going to be…

view full answer...

Answer 3

Yes, the mounting bolts do come with the CargoBuckle G3 Retractable Ratchet Tie-Down Straps #IMF18800 that you referenced.

view full answer...

Answer 4

The bolts that come with the CargoBuckle G3 Retractable Ratchet Tie-Down Straps are 7/16 of inch by 1-1/2 inches in length. I attached a review video for this system for you to check out also.

view full answer...

Answer 5

We have a video review of the CargoBuckle G3 Retractable, Ratcheting Tie-Down Straps, #IMF18800, and I have linked it for you. Installation is straight forward. The straps have a mounting hole on the base and include nuts, bolts, and washers. All you…

view full answer...

Answer 6

CargoBuckle G3 Ratchet Strap set #IMF18800 has straps that measure 6-feet at maximum extension but they can be used at any fraction of that length since they retract fully as shown in the linked photo. Each strap has a working load limit (WLL) of…

view full answer...

Answer 7

Over tightening straps that secure a bike by the handlebars can blow out the fork seals. So I would not recommend the use of a strap that automatically tightens as you will end up with the problem you experienced. The CargoBuckle G3 Retractable…

view full answer...

Answer 8

The CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On - 2" x 6' - 1,167 lbs - Qty 2 #IMF18800 you were looking at uses a 3/8" bolt to secure the strap to your trailer. This will not weaken the frame of the trailer given you…

view full answer...

Answer 9

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

view full answer...

Answer 10

We have exactly what you are looking for. The angled bracket in the picture you attached is the Mounting Brackets for CargoBuckle G3 Retractable, Ratcheting Tie-Down Straps - 2,500 lbs - Qty 2 #IMF16777 and will work perfectly with the CargoBuckle G3…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

What Size Bolts are Used to Install the CargoBuckle G3 Retractable Ratchet Tie-Down Straps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching