Recommend Bike Rack And Hitch Receiver For A 2009 Honda Fit

Question

Question:

Im looking to buy a hitch thing and hanging bike rack for my 2009 Honda Fit. I think that your website recommends the CurtTrailer Hitch Receiver C11064. I see that it is a class 1 hitch. Right now we only have 2 bikes, but theoretically we might want to use the rack on a newer car in the futureone that does support the weight of more than 2 bikes. Is it reasonable to get a 4-bike rack and which one?? but still only put two bikes on it at least with the class 1 hitch receiver? Thanks for your input.

asked by: Sarah G

0

Expert Reply:

Absolutely, although the maximum number of bikes that can be carried on a Class I hitch receiver is two, there are no rules stating that you cannot use a 4-bike bike rack to carry 2-bikes on a Class I hitch receiver, as long as it has the correct shank diameter and both of the bikes are carried on the first two bike slots, the slots closest to the vehicle..

We have two trailer hitch receiver options for you to choose from on your 2009 Honda Fit. We have the Curt Trailer Hitch Receiver part # C11064 and the EcoHitch Trailer Hitch Receiver # 306-X7286. I recommend using the EcoHitch # 306-X7286. The EcoHitch has the 2-inch opening instead of the 1-1/4. This will open you up to more 4-bike options. Also since it is not a class I, you could carry more bikes as long as the combined weight of your bikes and the carrier stays under the 300 pound tongue weight capacity or the capacity of your car if it is below 300 pounds.

For a hanging 4-bike bike rack compatible with 1-1/4" and 2" shanks, I recommend using the Thule Hitching Post Pro part # TH934XTR as this is one of our most popular hitch mounted hanging bike racks. To secure the rack to the receiver, I recommend using the Thule Snug Tite Hitch Lock and Anti-Rattle Device part # THSTL2 as this hitch pin has both locking and anti-rattle capabilities.

You will also need the Thule Bike Adapter Bar part # TH982XT for all non-traditional women's and children's frame bikes. I have attached a review and installation video of both hitches and the bike rack for you.

expert reply by: Conner L

0

Answer 1

Since you plan on carrying a bike rack on your 2009 Honda Fit, I would recommend you get the EcoHitch Hitch, part #306-X7286. Even though the hitch is more difficult to install, it gives you a 300 pound tongue weight capacity which is 100 pounds more…

view full answer...

Answer 2

For your 2009 Honda Fit the only hitches available are Class I hitches like the Curt hitch part #C11064. To carry a bike rack with this hitch will require the use of a Class I compatible bike rack. The two Yakima racks you mentioned would not work.…

view full answer...

Answer 3

Great question! These hitches are both confirmed fits for your 2009 Honda Fit. They both have have limited lifetime warranties and black powder coated finishes for great corrosion resistance. The Curt #C11064 has a 1-1/4-inch receiver opening, a 200…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...