How to Mount 4-Way Trailer Connector on Back of Ford Escape
Question:
Tow Ready 18144 Will above product work with the Draw-tite 75782 hitch, which looks like it already has the bracket this part mounts to?
asked by: Chris
Expert Reply:
The Tow Ready Mounting Bracket # 18144 works great with the Draw-Tite Trailer Hitch Receiver # 75782.
I've linked videos of both products being installed for you.
You'll also need a 4-way trailer connector installed on your Escape. The # 118566 harness installs by plugging in behind both tail lights and then connecting to the positive side of your battery. Everything for the install is included.
You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.
For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.
I've also included links to some articles on towing that you might find helpful.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class IV
- B and W
more information >
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Blue Ox
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How to Wire a 6 Pole Round Trailer End Plug
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Spare Tire Cover for 265/70R17 Size Tire
- Article: Trailer Tire Sizing
- Q&A: Trailer Wiring Harness Recommendation for 2017 Lexus RX 350 with Towing Package
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Does The LaSalle Bristol RV Roof Membrane Ship Folded Or Rolled Up
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112