Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(109 reviews)
Price: $254.22
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75782
Retail:$407.85
Our Price: $254.22
You Save: $153.63
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (109)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75782
- 2 Inch Hitch
- Class III
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 525 lbs TW
- 5000 lbs WD GTW
- 525 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold separately)
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 525 lbs
- Maximum TW when used with weight distribution: 525 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75782 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87641 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2019 Ford Escape
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Arrived Damaged
- Defective
- Did not arrive in time
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75782
Average Customer Rating: 4.7 out of 5 stars (109 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: John06/01/2023
Great trailer hitch,super strong, excellent paint quality. Great instructions to install. 4 Star only because the shipping Department did not have nut & bolt kit place in on original order. Waited a extra week.Otherwise customer service was very fast to respond.
by: Nick 03/27/2024
2014 Ford Escape
My order arrived in just 2 days. Package was all there and in good shape. Installed hitch and wiring harness in about 2 hours. Looks and feels good. Will put it to the test tomorrow.
by: Owen11/11/2017
Ordered on a Tuesday, received it on Thursday of the same week. It needs to be shipped in a better box. I installed the hitch by my self but would not recommend anyone try that. See pictures of the setup I used to help with the install. the pictures make it look easy but no you must get the left side in first. Get some help! You must place the washers as the video shows or you will have trouble with installing the muffler hangers.
Owen
11/11/2018
After one year my The trailer hitch I bought from etrailer.com Is doing fine. I liked this model because it is up behind the bumper on my 2017 Ford Escape, therefore not visible except for the receiver.
by: Mike03/03/2019
Ford Escape
Installed on a Ford Escape. Installation was very easy and assisted by the great step by step video from etrailer. I like this better than the optional factory hitch. This DrawTite hitch is more discreet than the factory hitch and also supports the common 2" draw bars. Just the right height to pull my utility trailer with a zero rise draw bar. Only downside is that it does interfere slightly with the hands free hatch opener.
by: Joseph 09/26/2023
Fast delivery, easy to install. Seems to be durable and of high quality. bought this hitch for my MTN bike rack.
by: James04/27/2018
2018 Ford Escape
My new Draw Tite hitch fit perfectly, you really need four hands when installing.. it would be a much easier install if yo have access to a car lift as it is a tight fit.. The wiring and installation of hitch went exactly as videos showed.. I wanted to protect back of vehicle in parking lots and that was one of the reasons for putting hitch on this car. Pictures attached. Thank you for your service
by: Tim04/26/2019
2017 Ford Transit T350
I removed a Draw-tite 1 -1/4 inch hitch receiver to install this Draw-tite 2 inch receiver. While the installation designs of both were identical, installation of the actual new 2 inch receiver was difficult! I had to use a hydraulic jack to position the unit to align the holes for the bolts correctly. I am satisfied with the end result but it took several hours work.
by: Robert B04/08/2018
2017 Ford Escape
The videos were perfect!!! The hitch and wiring kit were exactly what I was looking for and not hard to install. The hitch took me 1hr 45min and the wiring kit was an additional 2hrs. I took my time and did it right.
Not to mention the products I ordered arrived fast and the tracking e-mail for my order was accurate. Thank you. I will definitely order from etrailer.com again.
by: Jennifer S06/30/2017
Received our hitch in a timely manner. The hitch was hanging out of the box and when opened, the hitch looked like it was kicked around the floor before being put in the box with a lot of paint chipped or scraped off. Was offered a small refund/credit to repaint. The install was a bit more difficult than described for an experienced mechanic, about 2 hours with 2 people.
by: Jerry10/13/2018
2015 Ford Escape
Very good & video was very helpful for instructions. My only request would be a video for putting the wiring harness on.
by: Alan L.09/09/2022
Bracket doesn't allow holes to slign.
Mike L.
9/22/2022
When a trailer hitch is constructed, softer steel is used in the side plates as opposed to the harder steel used in the crossbar and receiver tube. This allows the hitch to flex along with the vehicle to a certain degree. This flexibility can also allow the hitch to get slightly bent out of position during shipping and handling. The good news is that its very easy to fix this if you know a few tricks as shown in the linked article.
by: Mike G05/05/2015
2015 Ford Escape
Very nice quality! Great price.Tight fit for bolts slots for muffler bracket on driver side. Ups delivered with hitch popping out of box. Looks great on vehicle. Only see reciever tube. Took longer than 40 minutes. Mostly because of muffler bracket tight alignment and waiting for my second person to help assist lifting. Great company will defiantly by from again in future. Thank's Mike
Mike G.
5/4/2016
Still working great!
by: Stacy02/19/2023
I would have given this product 5 stars but when it arrived some of the paint was chipped off from shipping, other than that the installation instructions was spot on
by: Mark 11/21/2016
2014 Ford Escape
initially ordered a hitch competitor and they boched it so bad ,
I ordered from etrailer.com not one issue, I ordered the hitch and great communication through the whole order up to the delivery. Packaging was awesome, if it wasn't for the online videos on installing i would say the written directions are terrible,,,,,,,,
Mark L.
11/21/2017
still working like a champ. its a hitch to put my bike carrier on....
by: George from New Jersey05/26/2023
2017 Ford Escape
I'm sure it will work out great just like the rest of the reviews, but wanted to mention.
Packaging was poor. Not properly wrapped or even wrapped when shipped. Came with paint chips missing that will rust in the future in my area.
Jenny N.
5/31/2023
I will have our Customer Service team reach out to you as soon as possible. What I recommend is touching up the hitch with a rust resistant paint like Rustoleum. It will help protect hitch now and in the future.
Helpful Links
by: Ken D.08/02/2017
2017 Ford Escape
The hitch was great. I didn't have any trouble putting it on, except i had to drill my extra hole out on my car. The bolt wouldn't go through without drilling. I had a 2014 with the factory hitch and was hit in the rear. The factory hitch folded like a piece of cheese. I think the Draw Tight hitch won't fold and will solve my problem on my new car.
Ken D.
8/3/2018
I still like the product. I feel it is better than the production trailer hitch that comes on the car.
by: Oliver Y05/25/2020
There were most definitely other sites to buy through but the customer service, the detailed instructions and installation videos helped me throughout the entire install. I received my items all in one box and it was quick only a few days. It's does take 2 people and possibly a floor jack (this helps stabilize to line up bolt holes). I've installed several hitches, this is by far the most difficult since you have to line up several holes and get it right. I suggest installing the larger bolts on the bottom then while keeping it loose, lining up the smaller bolts that go through the back. It took me about 3-4 hours for the total install, that includes the wiring. So about 2.5-3.5 hours. If you're laying down on the ground.
I've towed several loads of 1200-1800lbs and this does it no problem. The main gripe I have is the tailgate sensor is slightly blocked, I've trained myself to out my foot in the exact location where it picks up my foot. (Right of the hitch receiver and right exhaust).
The customer service was excellent, they have great communication, instructions and support after my install.
by: Stephen 07/26/2023
Had my local auto body install. It's been perfect.
by: Bridget H. 05/06/2019
I love my trailer hitch. My husband had a couple of minor problems with lining up the holes, but other then that, it's been great.
Bridget H.
5/7/2020
Good.
by: John02/20/2019
2015 Ford Escape
This hitch fits my 2015 Ford Escape perfectly. I installed it myself and used a floor jack to lift the hitch into place. This is the lighter duty one for this vehicle and it looks great installed. Tucks up under the bumper real nice. I use this for hitch mounted bike racks but have not towed anything yet. But I know it would if I had too.
by: Joe C06/27/2016
2014 Ford Escape
I purchased a hitch for my 2014 Ford Escape. I am a repeat customer, previously purchasing a hitch for my 2004 Matrix. The purchasing proceed was quick and easy.
The hitch arrived in about a week with all the hardware and instructions (though I had reviewed them online several times). I finally took the time today to do the installation. The installation was straight forward, I was surprised how little filing was needed to modify the access holes.
I had to do the installation alone (using jacks and jack stands), but I would recommend a helper like the instructions said. I just couldn't get the front exhaust hanger off so I installed the hitch with it on. It was a little tighter but still doable.
The fish wires worked really well...pretty slick setup.
I have a couple suggestions:
The 3 washers that go between the hitch and the bracket are tough to get in that tight space. I taped them together and used a piece of the cut heat shield to hold them while I installed the bolt. Perhaps an opportunity to develop something like the fish wires.
I mentioned the difficulty with the front exhaust hanger. I did find a video on the etrailer site. It gave some good ideas, but you couldn't see what the tech was actually doing. Perhaps a redo with some close ups of the hanger.
If I get another vehicle and need a hitch, I will definitely get it from etrailer.
by: James Pearce10/18/2017
Product allowed me to use trailer hitch on the intended vehicle. Mounting was straight forward and all materials for installation were provided. I performed the installation by myself with some difficulty due to the weight of the hitch but onec one side was loosely fastened the remainder of install went well. Major difficulties was in working hitch in and over the lowered exhaust piping and muffler.
by: TA05/21/2023
Fit like a glove, the vids help alot with in install. Its a beast to install so have your drinking buddy handy!
by: Jeffrey12/27/2018
Solid piece that works great for my bike carrier. I haven't pulled a trailer with it at this point as I have no need.
Fit is 4 out of 5. It does lower the factory exhaust tips down a bit which for most probably doesn't matter. That's my only complaint. Otherwise it's great.
by: Phil H.07/20/2017
2014 Ford Escape
Ordering the products I wanted, was easy. Their web page was simple to navigate, with almost more description then needed. Their prices were great, and my products shipped fast. I did watch there installation videos before installing my hitch and wiring harness. Using what I saw in the videos made a complicated job, so simple. If you need a hitch or wiring for your vehicle, there is no excuse to go anywhere else, etrailer is the best in my book!
25
109
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Ground Clearance with Draw-Tite Trailer Hitch 75782 Installed on a 2016 Ford EscapeWith Draw-Tite trailer hitch # 75782 installed on your 2016 Ford Escape the distance from the ground to the top of the receiver opening will be approximately 14 inches. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have...
view full answer...
- Hitch, Wiring, Weight Distribution and Brake Controller Recommendations for 2016 Ford EscapeLet's begin with the hitch. Due to its high tongue weight capacity, I'd recommend the Draw-Tite Max-Frame # 75782. For basic wiring, you'd start with the # 118566 which would provide basic lighting for your utility and boat trailer. For the camper that's equipped with electric brakes, you'll need a brake controller to actuate the brakes. I'd recommend a proportional controller like the Tekonsha Prodigy P2, part # 90885. The P2 will provide safe and predictable braking. The controller is...
view full answer... - Hands-Free Lift Gate Not Working After Trailer Hitch Installation on a 2014 Ford EscapeThe instructions for trailer hitch # 75758 show the general area where the hands-free liftgate sensors should still work but it isn't exact. The area seems to be more towards the center point between the hitch receiver and exhaust pipes on either side (or even closer to the receiver than the pipe) and not exactly where the instructions indicate. We have tried it before and it worked for us. I recently learned that Ford has placed the sensors in different places on some Escapes. If you...
view full answer... - Recommended Trailer Hitch, Towing Accessories and 2-Bike Rack for 2013 Ford Escape TitaniumHappy Independence Day to you as well! The Draw-Tite Class III hitch, part # 75758 is a confirmed fit for ALL models of the 2013 Ford Escape, including your Titanium edition. Actually, I'd personally prefer to use the Draw-Tite Class III, part # 75782. This hitch would be better concealed, so that all you'd see from the rear of the vehicle is the receiver tube, rather than the whole hitch like you would with the # 75758. Either hitch would work great as an attachment point for a bike rack...
view full answer... - Comparing Trailer Hitches for a 2019 Ford EscapeThere are indeed quite a few trailer hitch options for a 2019 Ford Escape but they can all be broken down into two categories, concealed cross tube and visible cross tube. The concealed cross tube option I recommend is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75782 and the visible cross tube option I recommend is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75758. The Draw-Tite Max-Frame Trailer Hitch Receiver with the visible cross tube is easy to install as all...
view full answer...
- 2013 Ford Escape SEl Trailer Hitch Compatibility with Lift Gate SensorsThe Curt Trailer Hitch Receiver - Class III # C13186 is the correct fit for your 2013 Ford Escape and my recommendation over the Class II- 1-1/4 inch # C12111. They utilize the same mounting, but the Class III is much stronger and will allow more accessory options in bike racks, cargo carriers, and ball mounts. With either option the Hands-Free Liftgate sensor areas will be limited to either side of vehicle near exhaust pipes. If you want a stronger hitch, with the Hands Free sensors...
view full answer... - Recommended Trailer Hitch Receiver And Cargo Carrier For 2014 Ford EscapeFor your 2014 Ford Escape, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2", # 75782. This is an easy bolt on application that won't interfere with the optional Hands-Free Liftgate. The Draw-Tite # 75758 is also a good option, but not all the sensors of a Hands-Free Liftgate will work with this hitch, although the install is slightly easier. This trailer hitch receiver is compatible with the 23x47 Carpod Walled Cargo Carrier for 2" Hitches - Steel - Folding -...
view full answer... - Will Hitch From 2007 Ford Escape Work With 2017 Ford Escape?There are no hitches which are going to fit both a 2007 and 2017 Ford Escape. For a new hitch with the '17 Escape I recommend the Draw-Tite # 75782. This is a Class III hitch with a tongue weight capacity of 525 lbs and a gross trailer weight capacity of 5,000 lbs. I have included a link to a video install of this hitch on a 2017 Escape for you to take a look at.
view full answer...
- Replacement Class III Hitch for 2016 Ford Escape with Class II Factory HitchMy contact at Draw-Tite has not yet seen a 2016 Ford Escape with factory-installed Class II hitch so he could not provide much detail about the process of removing it. In some cases a factory hitch can be welded on but this is unlikely on your 2016 Escape. Odds are that the 1-1/4-inch Class II hitch on the car now is a bolt-on aftermarket product like the 2-inch Class III hitch we offer, part # 75782 from Draw-Tite. This hitch will not interfere with rear lift gate sensor operation. Since...
view full answer... - Availability of a Hitch Fit for a 2017 Ford Escape S ModelThe Draw-Tite Class III Trailer Hitch, # 75758, is confirmed by the manufacture to fit all models of the 2017 Ford Escape, including the S. The Curt hitch, 13131, that you referenced is one that we do not carry, but I was able to find out that this hitch is only confirmed to fit the SE and Titanium model Escapes and the S model. If your Escape has the hands free rear liftgate feature installed, then I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver, # 75782. This hitch has been...
view full answer... - Shipping Weight, Package Dimensions for Draw-Tite Receiver Hitch item # 75782The shipping weight of the Draw-Tite hitch receiver item # 75782 is 41 lbs. The dimensions of the box are 21.25" X 42" X 11.25.
view full answer... - Are We Able to Install Trailer Hitch Ourselves on 2014 Ford Escape? The install on our trailer hitches is something that etrailer.com prides itself on making simplified for our customers. Within our resources we have step-by-step professional install videos, help articles and lifetime technical support from the experts at etrailer.com. The hitch I'm recommending can be installed yourself, but it depends on your technical ability. I recommend two people to help with the mounting of the hitch. The Draw-Tite Max-Frame Trailer Hitch Receiver # 75782 is the...
view full answer... - What is the Towing Capacity of the 2015 Ford Escape wtih 2.0 Ecoboost Engine?From what I am able to find, it appears that the 2015 Ford Escape 2.0 Ecoboost engine has a towing capacity of 3500-lbs; so you'll be able to tow any boat and trailer combo under that total weight. We always recommend confirming that with your owners manual, but you can also check with your local Ford dealer for confirmation of what your vehicle is capable of. Since you need a hitch in order to tow a boat with your vehicle, I recommend going with the Draw-Tite # 75782 since it is the only...
view full answer... - Least Visible Trailer Hitch Recommendation for 2019 Ford EscapeThe 3 trailer hitches with the most hidden receivers for your 2019 Ford Escape are the Curt # C13186, the Draw-Tite # 75782, and the etrailer.com # e98866. Since they all have the same profile it really boils down to what style suits you best. If you plan on towing then I recommend the Draw-Tite because it has an integrated wiring mounting bracket that really gives you a clean looking installation. If you only plan on using the trailer hitch for accessories like a bike rack or cargo carrier...
view full answer...
- How To Add A Tow Package to a 2016 Ford Escape TitaniumI do have the parts you will need to tow a trailer with your 2016 Ford Escape Titanium but these cannot be added after the fact to then give you the towing capacity of the version equipped with the factory trailer towing package because the towing capacity for the vehicle will remain unchanged throughout its life in the eyes of the manufacturer. That said, the factory towing package usually consists of a trailer hitch, trailer wiring harness, and transmission cooler. I have attached these...
view full answer...
- Best Bike Carrying Options for a 2015 Ford Escape TitaniumThere are options for carrying bikes on your 2015 Ford Escape Titanium, but trunk mounted bike racks will not fit on this model. There is a plastic fascia on the bottom that prohibits the use of the lower straps. The best way to carry bikes on your vehicle is to install a trailer hitch, like the Draw-Tite Class III Trailer Hitch part # 75782, and use a hitch mounted bike rack like the Thule Apex 2 bike rack # TH9024XT. I always recommend going with a hitch mounted bike rack because it...
view full answer... - Trailer Hitch Receiver For a 2013 Ford Escape That Works With Hands-Free Lift GateThere are a few hitches designed to work with the hands-free liftgate feature on your 2013 Ford Escape. I recommend the Draw-Tite MaxFrame Class III Hitch, part # 75782. This design allows you to continue to use your hands-free lift gate while the hitch is unloaded. I've included a video of this hitch's installation process so you can get familiar with the install process. As far as the capacity goes, you'll need to verify your capacity with your owner's manual, as each engine version...
view full answer... - Does Bumper Have To Be Cut When Installing Trailer Hitch On 2017 Ford EscapeWhen installing the Draw-Tite Max-Frame Trailer Hitch, part # 75782, the bumper does not have to be trimmed or cut. The installation does call for trimming of the heat shield. I have attached the installation instructions and you can see in step 2 of the instructions and in Figure 2 that the heat shield is the only thing that needs to be trimmed. as far as hidden, most of the trailer hitch is not visible when installed but the receiver is visible under the bumper.
view full answer... - What Does Draw Tite Hitch Part # 75782 WeighThe Draw Tite Hitch Part # 75782 that you referenced weighs 41 lbs.
view full answer... - Trailer Hitch for a 2013 Ford Escape and Thule T2 Pro XT Bike RackThe Thule T2 Pro XT 2-bike racks came in a 1-1/4 inch version and a 2 inch version. You will want a trailer hitch that has the same matching receiver size in order to avoid having to use an adapter with it in your 2013 Ford Escape. If the shank on your rack is 1-1/4 inches wide then I recommend # 36529 if your Escape has the hands free liftgate or # 36524 if it does not have the hands free liftgate. I have linked videos showing example installations of both hitches for you. If the shank...
view full answer... - Best Trailer Hitch for 2018 Ford EscapeThe best trailer hitch for your 2018 Ford Escape is the Draw-Tite # 75782 because it has a concealed crosstube to maintain the clean look of your Escape and has the highest tongue weight capacity among trailer hitches that fit your car. This Class III, 2" trailer hitch is almost entirely hidden behind your bumper, as you can see by the accompanying photos of the hitch installed on a 2018 Ford Escape. Additionally, you will still be able to use your Escape's hands-free liftgate feature...
view full answer...
- Recommended Trailer Hitch Receiver For 2019 Ford Escape SEL HybridI have a solution for you, but the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36501 is not confirmed to fit any variation of the 2019 Ford Escape. If you would like to stick with a Class 2 1-1/4" receiver then I would go with Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36529. This is rated for a max tongue weight of 300lbs and max towing capacity of 3,500lbs. While this is a great option if you have 1-1/4" accessories, I do recommend going...
view full answer... - Is a Weight Distribution System Needed on a 2014 Ford EscapeA weight distribution system is generally used when the rear of a vehicle is sagging due to the added tongue weight of a trailer. The springs bars attached to both the hitch and trailer will evenly distribute the tongue weight of the trailer across both axles on the tow vehicle which results in reduced vehicle sag and increased braking power. A weight distribution system can also help immensely with trailer sway. Therefore, if your vehicle is not sagging while the trailer is attached...
view full answer... - Trailer Hitch Receiver and 4-Way Flat Wiring Harness For a 2016 Ford Escape With 1.6L EngineYes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75782 will fit your 2016 Ford Escape with the 1.6L engine. It has been confirmed to fit all trim levels of the 2016 Ford Escape. This particular receiver features a 2" receiver that widens the amount of available hitch mounted accessories that you can use. The T-One Vehicle Wiring Harness # 118566 will give you a 4-way flat connector. This will operate the lights on small trailers you might tow and can also allow for Auxiliary Lights...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Zach D
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Laura H
Updated by:
Sarah H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
6/3/2024
One year later, Hitch and all welds, paint, AA+. Love that hitch. Use it all the time.