Replacement Bearings and Seal for Dexter Hub 8-147
Question:
Customer Service, my name is Leo and I picked up an old Dexter axle that previouos owner cut the elec-wire to the elec-brakes. Both hubs are rubbing and grease is contaminated with watertan/lt grey color. Need to replace the bearinigs, seals, probably the races and anyting else you suggest. a HUB INFO... a1- Hub1 Outter Face: Dexter 8-147, 7 * CFD a2- Hub2 Outter Face: Dexter 8-147, No2 / 494 a3- Hub1and2 Inner Face: 8A-2092 8A-2092 b WHEEL RIM b1- Inner Face: U.S. Patent # D219733 b2- 13inch x 4.5inch w/4-bolt on 9.44 pattern c AXLE c1- Diameter? Going on OD 7-7/8 inches???....so....not sure if thats how you measure round axle. U-bolt that it takes is 2-1/2ID so Im guessing its at least a 3500 lb rated axle?!!! Need to order a Bearing Kit with the correctinch P/Ns so need your help in matching things up. Will attach a pic. Thanks,
asked by: Leo A
Expert Reply:
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM48548
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.375 Inch I.D.
- Bearing LM48548
- Race LM48510
- 2500 lbs Axle
- TruRyde
more information >
Continue Researching
- Search Results: shackle links trailer leaf spring suspension
- Q&A: Replacement Hub/Drum Assembly Needed for a Dexter 8-147 Assembly
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Video: Truryde Nylon Bushing Review
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Fulton Single Axle Trailer Fenders with Top and Side Steps - Black Plastic - 15" Wheels - Qty 2
- Shop: Replacement Trailer Hub Bearing - LM48548
- Article: Most Popular Wheel Bearings
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 15" Wheels - Qty 1
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Search Results: dexter 8 147
- Video: Packing Trailer Bearing Demonstration
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 13-4 Review
- Video: Review of Redline Trailer Leaf Spring Suspension - Equalizer for Slipper Springs - E4541-Z
- Video: Redline Trailer Suspension SP05-080 Review
- Video: Review of Dexter Trailer Leaf Spring Suspension - Hangers - DX54CR
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Q&A: What Is Hole Size For Mounting 2 Inch Round Trailer Lights With Rubber Grommet
- Q&A: How are Fulton Plastic Top and Side Step Fenders Attached to Trailer
- Search Results: 171255
- Search Results: 7 pin trailer
- Search Results: 7 pin trailer wiring harness
- Search Results: shackle straps
- Q&A: Is There Advantage to 3 Leaf or 4 Leaf Trailer Suspension Leaf Spring
- Search Results: hangers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
- Q&A: Replacement Hub for Older Dexter 8-245
Brian
3/19/2024
Can you tell me what size axle this same hub is on. I have a old gooseneck trailer with these same axles on it and didn't know weight wise. Some website that I came across said 7k per a le but they don't seem that big. And since I'm will to upgrade hubs I didn't know if there is a new hub I could upgrade to get a 8x6.5 or so.ething similar.