Replacement Hub/Drum Assembly Needed for a Dexter 8-147 Assembly
Question:
hello I have a 1982 goldrush car trailer that I bought many years ago, the drum-hub is part # 8-147 inner bearing is LM48548, my question is I want to upgrade the wheels and drums to newer parts like conventional 5 or 6 lug wheels and 15 inch tires! are there any newer drum-hub kits available to replace my drums so I would be able to use a more modern wheel. thanks
asked by: Fred G
Expert Reply:
Your drum/hub that is the Dexter 8-147 part number should have an inner bearing # LM48548, an outer bearing # L44649, and a grease seal # 58846. If this is the case then we do have some hub/drum assemblies that would work great for your application.
The hub/drum assembly that I recommend using is the part # AKHD-545-35-K which is compatible with 3,500 lb axles and has the bearings and seal that fit your spindle. It fits 10" brake assemblies so you will want to verify that on your end.
This assembly has the common 5 on 4-1/2" bolt pattern which will fit most standard 15" wheels that use 5 lugs. You could use the Taskmaster Provider # TR20515D for the tire and a #AM20422 for the wheel. This is a ST205/75R15 radial trailer tire on a 15" white spoke wheel. It has a load range of D (2,150 lbs at 65 psi) and a speed rating of 81 mph. They would need mounted at a local shop. You do want to verify that the tire section width of 7.99" and the overall diameter of 27.17" will fit correctly with the fenders on your trailer.
I have linked some videos for you to check out as well.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM48548
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.375 Inch I.D.
- Bearing LM48548
- Race LM48510
- 2500 lbs Axle
- TruRyde
more information >
Provider ST205/75R15 Radial Trailer Tire - Load Range D
- Trailer Tires and Wheels
- Tire Only
- Radial Tire
- Load Range D
- 205/75-15
- 15 Inch
- M - 81 mph
- Taskmaster
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Bearings and Seal for Dexter Hub 8-147
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Replacement Trailer Hub Bearing - LM48548
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Video: Packing Trailer Bearing Demonstration
- Video: Review of Redline Trailer Leaf Spring Suspension - Equalizer for Slipper Springs - E4541-Z
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 13-4 Review
- Video: Redline Trailer Suspension SP05-080 Review
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: Two Piece Nylon Bushing - Qty 4
- Q&A: What Is Hole Size For Mounting 2 Inch Round Trailer Lights With Rubber Grommet
- Video: etrailer Electric Trailer Brake Assembly Installation
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - LM48548 Review
- Video: Review of Progressive Dynamics RV Converters - Power Control Center AC/DC Panel Charger - PD4135K
- Q&A: Wiring Diagram for Progressive Dynamics Converter Panel
- Search Results: dexter 8 147
- Search Results: akhd~545~35~k
- Search Results: 10 inch trailer brakes
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Search Results: lm48510
- Q&A: Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
- Search Results: 10" brakes
- Search Results: slipper spring hanger
- Search Results: 4 leaf slipper spring
- Q&A: Is There A Bearing Replacement Kit Available For A 8-147 Dexter Hub
- Shop: Vehicle Engine Heaters
- Shop: Wheel Liners
Mark C.
6/16/2020
I have the 8-147 Dexter brake hub and wonder if I can still obtain one to replace a damaged one. Upgrading to new hub is not of importance since I would then have to buy new wheels as well, increasing my costs. Thankyou