Recommended Spindles, Hub Assemblies, And Wheels For Old Trailer With Bearings In The Rim
Question:
Hi, I have an old trailer that has a 5 lug 10 bolt pattern wheel with the bearings in the rim. The outer bearing is a LM67049 and the inner is a KL68149. Id like to replace the wheels with standard hubs in order to use standard 5 lug wheels and rims. Any help?
asked by: Casey C
Expert Reply:
I have a hub for your trailer, but unfortunately we don't have a hub that will work with the inner diameters of your current bearings. You would need to replace your spindle to upgrade your system. You will need to consult a qualified trailer fabricator to have the old spindles removed and new spindles welded on. We carry the parts that would be needed.
For the spindle, I recommend the EZ Lube Spindle # TRU74FR. This will have the built in grease zerk for easy maintenance.
For the hubs, I recommend the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5-1/2 # AKIHUB-555-35-EZ-K. This is the complete assembly you need including the bearings seal and grease cap. It also includes the lug nuts for the 1/2 inch wheel studs.
For your wheels and tires, I then recommend the Taskmaster Provider ST205/75R15 Radial Trailer Tire with 15" Wheel # MX97FR. This is the most common size wheel for that bolt pattern. This tire has a speed rating of 81 mph and has a load capacity of 2,150 lbs at 65 psi. These tires and wheels have great tread and are ideal for highway driving.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Provider ST205/75R15 Radial Trailer Tire w/ 15" Vesper Silver Mod Wheel - 5 on 4-1/2 - LR D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 205/75-15
- 15 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Acrylic Enamel
- Taskmaster
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Locating Replacement Bearings for 1995 Jayco Eagle 10 Pop Up Camper
- Search Results: idler hub
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: wheel bearing grease
- Search Results: bearing grease
- Search Results: jayco~adapter
- Article: Most Popular Wheel Bearings
- Article: Overview of Lubricating Grease
- Q&A: Recommended Bearing Buddies To Fit Hubs
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: How To Determine What Correct Propane Pigtail Is Needed
- Shop: MB Sturgis Propane Pigtail w/ Back Check - RV Type 1 x 1/4" Male NPT - 2'
- Shop: Greystone Outdoor RV Griddle and Grill - Stainless Steel - 12,000 Btu - 17" Wide
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Q&A: How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
- Q&A: Bearings and Seal for a 3,500 lb Dexter Torflex Axle
- Q&A: Can You Install an EZ Lube Hub and Drum on a Non EZ Lube Axle
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: propane
- Search Results: propane mount
- Search Results: dual propane tank holder
- Video: JR Products Complete Propane Tank Holder Mounting Kit Review
- Article: How to Measure for Trailer Hitch Drop
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring