Hub and Drum Assembly for AL-KO T-52 Axle
Question:
Parts for al-ko t52 axle
asked by: Steve M
Expert Reply:
Based on my research, your AL-KO T-52 Axle has # 42 spindles that use hub assemblies with a # 25580 inner bearing and # 15123 outer bearing. You will just want to determine the bolt pattern you are needing as well as the axle capacity, as this can vary between different models. I have attached an article that will help you determine the bolt pattern on your existing hubs.
The etrailer.com Trailer Hub and Drum Assembly # AKHD-655-6-K will work for 5,200 pound and 6,000 pound axles and it has a 6 on 5-1/2 inch bolt pattern.
For compatible electric brake assemblies, I recommend the etrailer.com Self-Adjusting # AKEBRK-7L-SA for the Left Hand and # AKEBRK-7R-SA for the Right Hand. These are 12 x 2 inch brake assemblies that use a 5 bolt mounting flange bolt pattern.
I have also included an article on trailer hubs and bearings that you may find helpful.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Gooseneck Hitch
- Shop: Trailer Hitch
- Shop: Gen-Y Hitch Aluminum Loading Ramp Set - 8' Long x 15" Wide - 10,000 lbs
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Replacement Trailer Hub Bearing - 15123
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Round - 2-5/16" Ball - 30K
- Search Results: 10~36
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Headache Rack
- Search Results: al ko 4400 lb axle
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Search Results: 5/8 inch hitch pin
- Shop: Fifth Wheel Hitch
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-K
- Search Results: 8~219
- Search Results: receiver hitch
- Search Results: bearing buddy 1980
- Video: etrailer.com Trailer Hitch Installation - 2009 Chevrolet Silverado
- Search Results: 44649
- Shop: Tool Box
- Q&A: Will the Gen-Y Hitch Aluminum Loading Ramp Set Work with a Skid Steer
- Shop: Cold Air Intake
- Shop: Air Filter
- Video: etrailer Trailer Brakes AKEBRK-7R-SA Review
- Q&A: Axle Seal Replacement for AL-KO T52 Trailer Axle
- Q&A: Looking for Grease Seal to Replace Al-Ko # 568862 Seal on a 5200 Lb Al-Ko Axle
- Video: HWT Tires and Wheels - Wheel Only - AM20458 Review
- Q&A: Replacement Double-Lip Grease Seals to Replace AL-KO 568862 or Hayes 09103304L
Travis
6/16/2020
What’s the part number for the inner grease seal for the 25580 bearing?