Replacement Trailer Roof Vent Cover with a 4-Point Hinge
Question:
I am replacing the cover on a 1990 prowler lynx. it is 4 point pin hinge. old cover is 14by14 inside edge to inside edge. the 61628 looks identical. does this sound right.
asked by: Mike L
Expert Reply:
Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer.
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Products Referenced in This Question
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- LaSalle Bristol
more information >
Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- White
- MAXXAIR
more information >
Product Page this Question was Asked From
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can MaxxFan RV Roof Vent Work with Lithium Batteries
- Q&A: Recommended Butyl Tape for MaxxAir MaxxFan Install
- Q&A: Recommended Butyl Tape For Installing Slide-Topper Awning
- Q&A: Recommended Butyl Tape And Sealant For Installing A MaxxAir RV Roof Vent
- Q&A: Can Solera Slide Topper LCV000165061 be Installed on Camper With Awning
- Q&A: Why is it Not Recommended to Use MaxxFan Roof Vent Above Shower
- Q&A: Wire Size Used to Install MaxxFan Deluxe Roof Vent w/12V Fan & Thermostat MA00-05100K
- Article: How to Install an RV Awning From Scratch
- Article: Trailer Wiring Diagrams
- Article: Hitch Adapters and Extenders
- Article: How to Replace or Install an RV Roof Vent
- Article: How to Replace an RV Roof Vent Cover
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: Beginner's Guide to RV Awnings: How to Open, Close, and Maintain Your Awning