Steering Stabilizer & Anti-Sway Bars for F-53-Based 2014 Fleetwood Bounder Class A Motorhome

Question

Question:

Fleetwood 2014 bounder... MasterCraft a good choice

asked by: Terry B

0

Expert Reply:

For your 2014 Fleetwood Bounder Class A motorhome that is based on the Ford F-53 with V10 engine you can use the Roadmaster rear Anti-Sway bar # 1139-144. For a front anti-sway bar you can use # RM-1139-148.

expert reply by: Adam R

0

Answer 1

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 2

Your 2015 Newmar Canyon Star Model 3610 is built on a Ford F-53 chassis which is plagued with handling issues. The biggest improvement you can make is a rear sway bar. For that you would want the part #1139-144. Next you would want to go with a front…

view full answer...

Answer 3

Your 2013 Coachmen Mirada is built on a Ford F-53 chassis so the Roadmaster sway bar part #RM-1139-148 that you referenced would be perfect. This is for V10 models with GVWR of less than 24k so it would work well. For a front sway bar then you would…

view full answer...

Answer 4

Yes, since your 2019 Thor Miramar 34.2 Motorhome is a Class A with the V10 and has a GVWR of 22,000 lbs the Roadmaster Front Anti-Sway Bar #RM-1139-148 will fit your motorhome. Attached are some videos and the installation instructions for you to…

view full answer...

Answer 5

For the front Tiger Trak track bar, use #TT2403 for the V10 engine model and #TT2404 for the V8 model. Blue Ox doesn't list a rear trac bar fit for your 2001 F53 chassis, so I'd recommend using a Roadmaster anti-sway bar, part #RM-1139-143…

view full answer...

Answer 6

Stabilizers are designed to dampen side-to-side movement of the wheels while sway bars are designed to reduce body roll during fast cornering and since RVs tend to sway side to side when traveling adding in anti-sway bars like the Roadmaster Front…

view full answer...

Answer 7

For your Class A motor home built on the 2016 Ford F-550 chassis you can use Roadmaster front anti-sway bar #RM-1139-148. This unit will replace the factory sway bar.

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Steering Stabilizer & Anti-Sway Bars for F-53-Based 2014 Fleetwood Bounder Class A Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching