Will Roadmaster Front Anti-Sway Bar Fit 2019 Thor Miramar 34.2 Class A Motorhome with F-53 Chassis

Question

Question:

Will the RM1139-144 Work on My Thor Mirimar 34.2 Class A Gas Motorhome?

asked by: David S

0

Expert Reply:

Yes, since your 2019 Thor Miramar 34.2 Motorhome is a Class A with the V10 and has a GVWR of 22,000 lbs the Roadmaster Front Anti-Sway Bar # RM-1139-148 will fit your motorhome.

Attached are some videos and the installation instructions for you to reference.

expert reply by: Jon G

0

Answer 1

There isn't any follow up maintenance required after you install the Roadmaster Front Sway Bar part #RM-1139-148 on your RV. Just install it and enjoy your improved handling and ride quality!

view full answer...

Answer 2

For your 2014 Fleetwood Bounder Class A motorhome that is based on the Ford F-53 with V10 engine you can use the Roadmaster rear Anti-Sway bar #1139-144. For a front anti-sway bar you can use #RM-1139-148.

view full answer...

Answer 3

For the front Tiger Trak track bar, use #TT2403 for the V10 engine model and #TT2404 for the V8 model. Blue Ox doesn't list a rear trac bar fit for your 2001 F53 chassis, so I'd recommend using a Roadmaster anti-sway bar, part #RM-1139-143…

view full answer...

Answer 4

I checked with Roadmaster and verified the correct front anti-sway bar for your Class A 2017 Ford F-53 chassis with a 18,000 lb GVWR; it is the following part number: - Roadmaster Front Anti-Sway Bar #RM-1139-148

view full answer...

Answer 5

Based on my research, your 2013 Fleetwood Bounder RV is built on the Ford F-53 chassis. I do recommend verifying this with the RV's paperwork. I spoke with my contact at Roadmaster regarding the anti-sway bars for your RV. He did say that your…

view full answer...

Answer 6

If your brake and turn signal lights are not working on your tow car, then start by checking the fuses in your RV to see if everything checks out. You will also want to check your connectors to see if there is any type of corrosion which may be…

view full answer...

Answer 7

Thankfully in recent years the Mopar flat towing wiring kit you mentioned is no longer required for flat towing Jeep vehicles like the 2021 Jeep Cherokee Trailhawk. They were able to fix the need for the harness. We have the other parts needed to…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Will Roadmaster Front Anti-Sway Bar Fit 2019 Thor Miramar 34.2 Class A Motorhome with F-53 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching