How Do RV Step Outriggers Install
Question:
Where do they mount and how?
asked by: Kenny C
Helpful Expert Reply:
Outriggers such as # LC301704 bolt to the sides of steps such as # LC432698. The outriggers will bolt to the RV frame. For hardware to attach the steps to the outriggers use # LC118155-72.
The specific location and orientation of the outriggers depends on the RV/trailer. There isn't one set way they would have to be installed. And some applications do not use the outriggers.
The installation of the steps is as follows:
1. Ensure step is completely back up against the step supports on frame [Angle or Tube].
2. Insert carriage bolts and flange lock nuts. Tighten down only until snug in order to make adjustments.
3. Verify that the step housing is square, level to the outrigger, and plumb to the chassis. Once you have verified this, tighten the carriage bolts down.
4. Attach tech screws through the step supports, 2 (1) each side, to the step supports on the chassis.
5. Attach lag bolt or bolts to floor through the outer end holes in the outrigger.
Products Referenced in This Question
Mounting Hardware for Lippert Electric and Manual RV Steps
- Accessories and Parts
- RV Steps
- Mounting Hardware
- Lippert
more information >
Lippert Outriggers for Manual RV Steps
- Accessories and Parts
- RV Steps
- Outriggers
- Lippert
more information >
Product Page this Question was Asked From
Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 28 Inch Wide
- 4 Steps
- 8 Inch Drop/Rise
- No Ground Contact
- Aluminum
- Lippert
more information >
Continue Researching
- Shop: Lippert Outriggers for Manual RV Steps
- Video: Review of Lippert Outriggers For Manual RV Steps - LC301704
- Q&A: How Does Outrigger SM-01 Install on Frame of Trailer
- Video: Review of TorkLift RV and Camper Steps - Add-A-Step - TLA8101
- Shop: Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- Q&A: Torklift GlowStep Replacement Support Bracket and Bolt
- Q&A: Recommended RV Entry Step That Can Have Steps Added As Needed
- Q&A: How To Add A Step to the TorkLift GlowStep Revolution Scissor Steps
- Shop: Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
- Shop: Add-A-Step for TorkLift GlowStep Revolution Scissor Steps with 25-1/2" Wide Mounting Base
- Shop: Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs
- Shop: Brophy Camper Scissor Steps - 3 Steps - Steel - Diamond Tread - 17" Wide - 275 lbs
- Q&A: Recommended RV Steps For A 2015 Lance Trailer With A 25-1/2" Mounting Bracket Spacing
- Shop: Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs
- Q&A: 7-Way RV Trailer Connector Wiring Diagram
- Q&A: How to Lippert Outriggers Install when Installing New RV Pull Out Steps
- Search Results: frame outrigger
- Search Results: lc301704
- Search Results: 4000 lb axle
- Search Results: rv steps
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Shop: Trailer Wiring
- Search Results: 25580
- Video: Lippert SolidStep RV and Camper Steps Installation - 2019 Jayco Eagle Fifth Wheel
- Shop: Fifth Wheel Hitch