Recommended Trailer Hitch And Wiring For 2017 Audi A4 Avant

Question

Question:

Does this product fit Audi A4 Avant B9? C11448 How much is the electric cabling?

asked by: Wilfrid

0

Expert Reply:

The Curt Trailer Hitch Receiver, part # C11448 is a confirmed fit for your 2017 A4. This is a Class l hitch and it has a 1-1/4 inch receiver opening.

I recommend the Draw-Tite Sportframe Trailer Hitch, part # DT24950 over the Curt hitch because Curt requires the use of a stabilizer strap like part # 18050 for all non-trailer loads. It can be very difficult to find a good attach point on some vehicles.

If you are planning on towing I recommend a ball mount like part # C45019. This ball mount has a 5/8 inch rise or 1-1/4 inch drop and measures 9-3/4 inches long. For a hitch pin and clip you can use part # F-4.

For a 1-7/8 inch hitch ball I recommend part # C40001 and for a 2-inch ball I recommend part # C40018.

For a trailer wiring harness I recommend part # 119250KIT. This kit comes with a circuit tester that helps you identify the wires needed when installing the harness.

expert reply by: Jeffrey L

0

Answer 1

The Curt Trailer Hitch #C11448 that fits your 2017 Audi A4 can support a 4-bike rack; however, it is a Class I hitch so it is limited to carrying a maximum of two bikes. To put it another way, so long as the 4-bike rack is Class I compatible it can…

view full answer...

Answer 2

First, for a trailer hitch, I recommend #DT24950 for your 2017 Audi A4. I recommend this one over Curt hitch #C11448 because the Curt hitch requires a stabilization strap, #18050, when using the hitch with a bike rack and the Draw-Tite hitch does…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11448 and the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #DT24950 are rated for the same capacities and attach in the same locations. I…

view full answer...

Answer 4

We have a hitch for your 2018 Audi A4 Allroad #C11448. You have to make sure the bike rack is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. For a rack, I recommend the Kuat…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 7

It's good to know the Redline 2-Way Pop-Up Roof Vent #9106-2756 is finally back in style! :) There really isn't a "wrong" way to install it on a trailer but if it's raining you'd most likely want to keep it closed, or at the…

view full answer...

Answer 8

I recommend you only consider an inverter type generator. From the specs available to me online, your 2019 Forest River Salem 30KQBSS Travel Trailer is a 50-Amp service with 2nd A/C Prep option. If you have have the second AC unit installed or a…

view full answer...

Answer 9

The Champion 9,000-Watt Dual Fuel Inverter Generators w/ Parallel Kit, #CH49FR have a push button electric start and operate from either propane or a minimum 87 octane rating gasoline for their fuel source. Run time is up to 14 hours on gas and as…

view full answer...

Answer 10

The Champion 9,000-Watt Dual Fuel Inverter Generators w/ Parallel Kit, #CH49FR has the same power output specs regardless of type fuel used. There is a starting (surge) power output of 4,500 watts/37.50 amps with a running power output of 3,500…

view full answer...

Answer 11

We do have an option for an inverter to replace your 300 watt WIN-12/300TL, but the Progressive Dynamics part you mentioned is a converter, so for the same functionality you will want to replace it with a similar 400 watt inverter, the Go Power Pure…

view full answer...

Answer 12

The Furrion Chill Replacement Setup, #FR26PR, is designed to replace your current Furrion AC unit. This has two fans, each with their own motor and operates per the settings on your thermostat to turn on/off as required per compressor demand and your…

view full answer...

Recommended Trailer Hitch And Wiring For 2017 Audi A4 Avant

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching