Is Taillight Power Converter Included in Tekonsha T-One 4-Pole Wiring Harness 118467
Question:
Do you offer a power converter that goes with the class 2 hitch for the Subaru outback, Is it included with the wiring harness?
asked by: Roland
Expert Reply:
For a 4-pole trailer wiring harness to go along with the Class II hitches made for your 2017 Subaru Outback Wagon, Draw-Tite # 36493 and Curt # C12136, you can use Tekonsha T-One Vehicle Wiring Harness # 118467.
This kit does include a powered taillight converter that draws power for the trailer lights directly from the battery to ensure that your vehicle wiring cannot be overloaded by power demands from the trailer. The converter is the small black box integrated into the harness.
You can see an installation demo on your same vehicle by clicking on the video link provided.
This wiring harness provides a maximum current output of 2.1-amps for each stop/turn light and 5.6-amps for the taillights. If you happen to know (or if you can measure with a meter) the power draw from your trailer this will enable you to know that this T-One harness has sufficient capacity.
It is recommended that you use a small amount of dielectric grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent entry of moisture and dirt that can cause corrosion. You can use part # 11755.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Adjusting Dexter 10K Electric Trailer Brakes
- Q&A: Will Bolt Trailer Hitch Lock part # BL7023582 Fit 2-1/2 inch Hitch on a 2011 GMC Sierra
- Q&A: Which Bolt Locking Hitch Pin Can be Keyed to a 2014 GMC Sierra 1500
- Q&A: Does BOLT Trailer Hitch Receiver Lock For GM Center Cut Key Fit 2021 Chevy Silverado
- Article: Stability Control for Heavy Duty Vehicles
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Control Unit for a Kwikee Steps 909508000 Controller
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Factory Brake Controller Wiring Harness Location on a 2015 Mercedes Sprinter Motorhome
- Article: Surviving the Night in a Teardrop Camper...During a Winter Storm
- Article: Trailer Hitch Receiver Sizes
- Q&A: Replacement Axle For 84 Inch 3,500 Pound Dexter Axle
- Article: My Trailer Hitch Doesn't Fit