Replacement Hardware Kit Recommendation for Aries Bull Bar on a 2001 Dodge Ram 1500

Question

Question:

I need a replacement bracket for a aries bull bar for my 2001 dodge ram 1500 and im not sure what parts number i need

asked by: Jonathon P

0

Expert Reply:

The Aries Bull Bar for your 2001 Dodge Ram 1500 would have would be part # AA35-5000 or # AAB35-5000 which would mean that the hardware kit you would need is the part # AABRKT-35-5000.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For your 1997 Dodge Ram 1500 van we have the Curt hitch part #C13041 as a confirmed fit but the #13590 is not what you would need. The cut out in the side of the mounting bracket is designed to fit around your gas tank feed line.

view full answer...

Answer 2

The Curt trailer hitch part #13590 is a confirmed fit for your 2000 Dodge 3500 full sized van with a step bumper. It will not require any drilling or welding to install either. I attached a link to the install instructions for the hitch for you to…

view full answer...

Answer 3

Curt trailer hitch #13590 is designed to fit 1997 to 2003 full size Dodge vans with the factory step bumper. Your 1-ton van is a full size model so as long as it has the factory step bumper the hitch will fit. If it has the standard bumper and not…

view full answer...

Answer 4

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

view full answer...

Replacement Hardware Kit Recommendation for Aries Bull Bar on a 2001 Dodge Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching