Recommended Boat Winch, Trailer Jack, and Bunk Boards for 27 Foot Carver Boat and Trailer
Question:
I have 27 foot Carver boat ways around 8000 pounds looking for the proper boat winch. The trailer has flat bunks on it. Also looking for a trailer jack. Its a A-frame jack. Also want to know if you carry bunk slicks. thanks
asked by: John T
Expert Reply:
For your 27 foot Carver boat, the weight you referenced will put us into only electric options. Typically for boats, there is a ratio of 2:1 on the capacity of the winch. Our Super Heavy Duty Hand Winches fall slightly below that ratio, so a nice electric winch will be your best option. I'd suggest we go a little bigger than that ratio to account for steeper inclines and other variables with the Bulldog Winch Trailer Winch with Wire Rope, # BDW15019. It's 1.8 hp, permanent magnet motor delivers powerful, fast, and safe line pulling that place your boat safely onto your trailer. It also has a handy wired remote so you will have control at your fingertips while enhancing your sightline when loading and unloading. There is a wireless remote option, # BDW20212.
For your trailer's A-frame jack, I would recommend the Round A-Frame Trailer Jack, # TJA-5000S-B. This is a Sidewind jack that has a 15 and 5/8 inch travel and 5000 lb capacity. Remember the capacity is based only on the tongue weight of the trailer, so this will be more than enough to give you peace of mind. I'd also recommend getting the drop leg to make this an even more user friendly jack with the Drop Leg for eTrailer and Ram Jacks, # JF-1005H-Z.
We unfortunately do not carry bunk slicks, but we do carry roller bunks and carpeted bunk boards. Our carpeted bunk boards come in 2 to 6 foot lengths and are sold in pairs. For example, CE Smith Carpeted Bunk Boards for Boat Trailers-6 foot long-1 pair is # CE27840. The marine grade carpet helps protect the finish on your boat's hull and has a velvety finish. It is soft, strong, and weather resistant. We also have roller bunks like CE Smith Roller Bunks for Boat Trailers-6 rollers each-5 feet long-1 pair, # CE27710. These roller bunks are available in 4 or 5 foot length and are sold in pairs. These roller bunks ease boat loading and unloading as the boat rolls smoothly over the bunks. They are made of heavy duty black rubber rollers and 12 gauge galvanized steel.
Products Referenced in This Question
Wireless Remote Kit for Bulldog Winch 3400 and 4400 Trailer Winches - Plug-and-Play
- Accessories and Parts
- Electric Winch
- Remote Control
- Wireless Remote
- Bulldog Winch
more information >
CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 72 Inch Long
- CE Smith
more information >
Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Drop Leg
- etrailer
more information >
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Sidewind Jack
- 16 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- etrailer
more information >
Product Page this Question was Asked From
Bulldog Winch Trailer Winch - Wire Rope - Roller Fairlead - 4,400 lbs
- Electric Winch
- Car Trailer Winch
- Trailer Winch
- 3-Stage Planetary Gear
- 2.0 HP
- 4001 - 6000 lbs
- 31 - 40 lbs
- Slow - 0 to 4 fpm
- Plug-In Remote
- Wire Rope
- Bulldog Winch
more information >
Continue Researching
- Article: Finding the Right Electric Winch
- Article: Hand Winches
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Will CE Smith bolster Brackets for Pontoon Boat Trailers Fit Any Trailer
- Q&A: Replacement Hub/Drum for Lippert 8k Hub 2420801
- Q&A: Replacement 7 Spoke Aluminum Trailer Wheel for Aluma Trailer
- Q&A: 5th Wheel Slider Hitch Adapter For Gooseneck Trailer
- Q&A: What Size Wire is Compatible with Electrical Quick Connect for TW4000 Electric Winches, # DL24086
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Wire an Electric Winch
- Article: Trailer Jacks
- Q&A: Lens Replacement for Trailer Taillight with SAE Number AS2T216
- Q&A: What Size Nuts Are Needed for the Demco Trailer Stake Pocket Spare Tire Carrier