Replacement 800 lb Spring Bar Recommendation for Reese Head with 7110 Marked Near Ball

Question

Question:

I have an older Reese WD setup. I need new spring bars for it I am thinking 800 LBS. I attached a picture of the hitch but I couldnt find a part number. I did find some other numbers on it though. Next to the ball is a number 7110 and under that is 0203. Also, where the bar connects to the hitch is a number 7113 with 0203 under that. Are you able to find me bars for this hitch?

asked by: Jonathan B

0

Expert Reply:

I spoke with my contact at Reese regarding which replacement spring bars will fit your current system. You need the part # RP22225 which is an 800 lb tongue weight trunnion bar that will fit the head you sent in a picture of.

expert reply by: Jameson C

0

click to enlarge

Answer 1

To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind…

view full answer...

Answer 2

Because your trailer is fairly heavy, I would recommend you go with 2 of the #58392 lift brackets. The 58392 has extra gusseting welded to it for reinforcement, and would be better suited to a heavier trailer like yours, because the spring bars will…

view full answer...

Answer 3

It is interesting that you are experiencing more sway with the 1,200 lb Strait-Line #RP66084. Typically what we see is that weight distribution (WD) systems that are overrated for their towing setup cause the trailer to be more stiff. Nevertheless…

view full answer...

Answer 4

We do have many replacement spring bars like #RP22225 that are available as a single spring bar replacement. I have linked the page to these options for you so you can find the right replacement based on the brand as well as design of your weight…

view full answer...

Answer 5

Yes, we do offer replacement trunnion bars for weight distribution (WD) systems like the Reese #RP66022 that you referenced. You can click on the link provided to see all replacement trunnion bars for Reese and other brands. You will want to choose…

view full answer...

Answer 6

When determining the correct spring bars for your trailer you will need to take into account the weight of gear loaded behind the rear axle of the truck and the additional tongue weight loaded in the camper. I believe larger is better but in your…

view full answer...

Answer 7

You can upgrade your Reese Strait-Line Weight Distribution System with Sway Control, 10,000 pounds GTW, 600 pounds TW #RP66082 with the 800 pound trunnion bars, #RP22225 to increase your system's tongue weight. The part number includes 1 bar, so…

view full answer...

Answer 8

The first thing you need to know in order to pick out the correct weight distribution system is the loaded tongue weight of the setup when it is ready to tow. This is the most important factor to consider and I attached an FAQ article on how to…

view full answer...

Answer 9

When you say lift bar, I am unsure if you are asking for a the handle for lift brackets or if you are referring to the spring bars. For the handle for lift brackets, you will want #RP58162. This provides leverage to ease lifting a positioning of the…

view full answer...

Answer 10

Extreme tight turns like jack-knifing could result in the bar sliding too far and coming off the dual-cam mount on a Reese Strait-Line system. But average driving situations should not be a problem unless something was not adjusted correctly. With a…

view full answer...

Answer 11

Unless there is obvious damage to your weight distribution spring bars - rust, chipped-off material, or a clearly inappropriate bend - they should still be functional. On a trunnion style bar like Reese #RP22225 there is a bend at the trailer end of…

view full answer...

Answer 12

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Replacement 800 lb Spring Bar Recommendation for Reese Head with 7110 Marked Near Ball

Product Page this Question was Asked From

Continue Researching