eTrailer Axle Technology Trailer Hub and Drum Assembly compared to Titan Hub and Drum
Question:
I just purchase the AKHD-545-35-EZ-K, but after unboxing it and comparing to the old hub, I believe my hub resembles the T1543900CB042 more. This is off of a Pontoon boat trailer and the old hub actually has a hole in it. I assume to let water drain out. Any help would be appreciated.
asked by: John S
Expert Reply:
In comparing the eTrailer Axle Technology Trailer Hub and Drum Assembly, # AKHD-545-35-EZ-K, with the Titan Hub and Drum, # T1543900CB042, there are very few differences. The differences are mostly in the casting of the part, not in the function or fit of it. Both assemblies will work on the same 3500 lb axle and # 84 spindle. They are both designed to use the same inner and outer bearings and fit a 10 inch assembly. Either one will work just fine for your application.
As far as a hole in the drum, I have never seen or heard of that. The drum is not air or water tight against the brake assembly, so draining wouldn't be an issue.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 8" to 12" Wheels - Qty 1
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: How do Wheel Studs Typically Get Removed From Trailer Hub
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - RG04-040 Review
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-550-35-EZ-K
- Shop: MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke
- Shop: Ram Round A-Frame Trailer Jack - Topwind - 14-7/8" Travel - Zinc - 3,000 lbs
- Shop: Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: Redline Tires and Wheels RG03-040 Review
- Search Results: 10 electric brake drum
- Q&A: Correct Replacement Hub/Drum for 1994 Haulmark Elite 24' Trailer
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Q&A: Recommended 5 on 4-1/2 Hub for 3,500 lbs Axles w/ L68149 Inner Bearing and L44649 Outer Bearing
- Q&A: Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Search Results: rv vinyl trim insert
- Search Results: wells cargo trailer parts
- Search Results: hubs
- Search Results: 19~125
- Search Results: 58846
- Q&A: Which Electric Brakes Will Fit a 2013 Wells Cargo MC101-5-ME
- Video: Taskmaster Tires and Wheels - Tire with Wheel - A15R45BMMFL Review
- Q&A: What Grease to use with etrailer Pre-Greased Trailer Hub
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Search Results: 84 spindle
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer