Can Trailer Brakes be Added to Motorcycle Trailer Axle
Question:
I have a small trailer I pull behind a motorcycle can electric bikes they put on the trailer
asked by: Rosemarie
Expert Reply:
When adding brakes to a trailer the first thing you will need is a brake mounting flange on the axle.
If you do not have a brake flange I recommend part # 4-35. This should be welded in place by a professional welder because it needs to be square and concentric.
Beyond that step we have to first determine what hubs/spindles you have on your trailer so that we can first fit a hub/drum (if available) to it and then install assemblies as well.
If you check out the help article I attached you will see this entire process walked through.
The wheels look pretty small on the trailer, what size does the tire sidewall say?
Products Referenced in This Question
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Product Page this Question was Asked From
Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Manual Leveling
- Under-Dash Box
- Dash Mount
- Up to 2 Axles
- LED Display
- Up to 125 Degrees
- Dexter
more information >
Continue Researching
- Search Results: flange
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Shop: Brake Controller
- Video: Redline Trailer Brakes 4-35 Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-2 Review
- Search Results: caliper flange
- Search Results: mounting flange
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Q&A: Are Specs Available for Welding on a Brake Mounting Flange to a Trailer Spindle
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T3584F-EZ-8974 Review
- Search Results: spindle
- Search Results: l44543
- Search Results: electric brake controller
- Shop: 4" Carbon Fiber Digital Caliper
- Shop: Hayes Energize III+ Trailer Brake Controller - 1 to 3 Axles - Proportional
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: Recommended Electric Brake Set Up for a Trailer w/ a 2,200 lbs Axle
- Q&A: Spindle Recommendation for Trailer with 3 Inch Round Axle with 4 on 4 Wheel Bolt Pattern
- Q&A: Recommendation For Replacement For Brake Mounting Flange
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: 25580
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller