Are Specs Available for Welding on a Brake Mounting Flange to a Trailer Spindle
Question:
I am an expert welder and I have a boat trailer without flanges on the axles. I am not trying to replace the whole axle when I can just weld the flanges on myself. I am looking for the schematic or specs on where to weld the flanges at.
asked by: Daniel H
Expert Reply:
There is a special jig required to weld on brake mounting flanges such as # 4-35. The flange needs to be welded on concentric and square. Square meaning the flange must be a true 90 degrees from the spindle and concentric meaning the gap around the spindle must be the same 360 degrees around.
If not, the brakes will not wear evenly and will cause reduced braking performance. If not at the right depth the brakes will not be as effective and again, wear unevenly.
Ideally you would take the trailer to a shop that works on trailers that has the proper jig.
Product Page this Question was Asked From
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Video: Redline Trailer Brakes 4-35 Review
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Video: Review of Kodiak Trailer Brakes - 8 Inch Hub and Rotor E-Z Lube Disc Brakes - KOD87FR
- Search Results: 3025p
- Search Results: 39510
- Search Results: e99011
- Search Results: akebrk~2
- Search Results: bk1~100
- Search Results: 8~173~16uc3
- Search Results: tekonsha 9030 brake controller
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: B&W Ball and Safety Chain Kit for Ford, GM, Chevy, and Nissan Titan XD Underbed Gooseneck Hitch
- Shop: B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Redline Trailer Brakes 4-34 Review
- Video: Kodiak Disc Brake Kit Installation K2R35D
- Q&A: Dimension Of Brake Mounting Flange For 7 Inch Electric Or Hydraulic Brakes
- Q&A: Why Dont 2,000 Lb Trailer Axles Comes with a Brake Mounting Flange
- Q&A: How Should a Trailer Brake Mounting Flange be Welded to a Trailer
- Shop: Brake Controller
- Q&A: Recommendation For Replacement For Brake Mounting Flange
- Video: Dexter Axle Trailer Brakes BP01-068 Review
- Video: This Old Trailer: Electric Trailer Brake Installation Part 1