Availability of Longer Shank for Use with Fastway Weight Distribution System
Question:
I recently purchased a Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW system, but the shank is too short for my tow vehicle, is there a longer one I can buy that would be compatible with this system?
asked by: Devin B
Expert Reply:
Sounds like you are in need of a weight distribution shank that can do more drop than what came with your FastWay E2 kit part # FA94-00-0800.
For that we have the part # FA92-02-4315 which can do drop of up to 8 inches if used with a round bar setup or 9-3/4 inches if used with trunnion setup.
If instead you meant length like horizontal length the part # 17120 measures 10 inches from pin hole to center of shank hole.
Products Referenced in This Question
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 9 Inch Rise
- CURT
more information >
Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- 14000 lbs GTW
- Fits 2 Inch Hitch
- e2
- Round - 9 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 12 Inch Rise
- Fastway
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Fastway
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Replacement Weight Distribution Bolt-Together Round Bar Head
- Video: Pro Series Weight Distribution PS58442 Review
- Video: Reese Weight Distribution Shank Review
- Search Results: equal~i~zer
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Shop: Replacement Bolts for Equal-i-zer Weight Distribution Head - 4,000 lbs GTW
- Video: Air Lift LoadLifter 5000 Ultimate Plus Air Springs Review
- Q&A: Fastway Weight Distribution-Amount of Washers, How to Remove Spring Bars and Torque Figure Question
- Video: Fastway e2 Weight Distribution System Installation - 2017 Chevrolet Colorado
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: How To Determine The Correct Rise/Drop For A Weight Distribution Shank For 2 Inch Hitch
- Q&A: Troubleshooting E2 Weight Distribution Hitch Sway Issues
- Q&A: How Close Does Trailer Ball Height Need to be to the Height of the Trailer Coupler
- Q&A: Shank with More Drop for Fastway e2 Weight Distribution System
- Q&A: Choosing the Correct Rise or Drop for Weight Distributing Shank
- Q&A: Needing a Weight Distribution Hitch That Will Provide for a 3 Inches of More Drop
- Shop: RV Camera
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: EcoHitch Hidden Front Mount Trailer Hitch Installation - 2021 Ford F-250 Super Duty
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Article: 5 Things to Know About Weight Distribution Hitches