Torque Rating for Spindle Nut on Trailer Hubs
Question:
May I have the info on what the torque specs are for a 10,000 pound dual axle gooseneck trailer , I am changing out the rotors and brake pads and bearings, its a 40foot with ramps, Dexter hub. Trail master 2006
asked by: Roscoe
Expert Reply:
When our installers replace a trailer hub, there isn't a set torque spec used when tightening the spindle nut. The hub is placed on the spindle, making sure the inner and outer bearings are correctly seated. The spindle nut is then run down until you start feeling resistance. At that point, spin the hub and check for end play (wobble). If the hub still seems a bit loose, you can run the nut down a bit more.
As you'll see in the video I've linked to, tightening the nut is something you'll do by feel, not by a particular torque rating.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Kodiak Hydraulic Brake Hose - Straight and 90-Degree Male Fittings w/ Stainless Flares - 1.5'
- Shop: Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
- Shop: Replacement Brake Pads for Dexter Disc Brakes - 10,000 lbs and 12,000 lbs - Semi-Metallic - Qty 4
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Square - 2-5/16" Ball - 25K
- Shop: Convert-A-Ball Ball Mount for 2-1/2" Hitches - 3/4" Rise, 2" Drop - 18,000 lbs
- Search Results: tjda~5000s
- Shop: Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 7-1/4" Shank - 14 Hole - 20,000 lbs
- Shop: Gooseneck Hitch
- Search Results: 17513
- Shop: Trailer Wiring
- Search Results: 295~000019
- Search Results: modulite
- Video: Best Brake Actuator Options
- Search Results: blaylock industries
- Search Results: trimax locks
- Search Results: 48349
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Shop: Brake Controller
- Q&A: What Diameter Holes are Required For The LED Trailer Mini Clearance Lights MCL10AKB & MCL11RKB?
- Q&A: Dexter Brake Assembly Recommendations to Replace Part Number 023-357-00
- Shop: Fifth Wheel Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Dual Propane LP Tank Setup 100 Lb for RV or Travel Trailer
- Q&A: Replacement Brake Assemblies for Dexter 023-358-00 Trailer Brakes
- Shop: BOLT brand vehicle and hitch locks
- Video: Kodiak Trailer Brakes - Disc Brakes - K2R712DAC Review
- Shop: Spare Tire Bike Racks
- Q&A: Common Torque Specifications for Lug Nut Size