What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
Question:
what is the dimension of the holes on 8k dexter brake center to center on top two holes and virtical on top to bottom? thx
asked by: Vince
Expert Reply:
The four bolt brake mounting flange for 8,000 lb trailer axles is going to be more or less an industry standard. This industry standard is 3-5/8" across left to right on center and 3-7/16" top to bottom on center. This could very well vary 1/16" depending on where you measure but rest assure if you have an 8,000 lb trailer axle with four bolt brake mounting flange the Electric Trailer Brake with Dust Shield part # AKEBRK-8L should be the correct braking assembly for you.
Products Referenced in This Question
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 8,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 8,000 lbs
- Shop: Trailer Hub Wheel Stud, Drive-In, 9/16" x 2-1/2" - Qty 1
- Search Results: gooseneck coupler
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Dexter Hydraulic Brake Kit - Free Backing - Galphorite - 12" - Left/Right Hand Assemblies - 6K
- Shop: Fifth Wheel Hitch
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Search Results: equalizer
- Q&A: 12 x 2 Inch Electric Trailer Brakes with a 4 Bolt Mounting Pattern
- Search Results: trailer axle
- Shop: Gooseneck Hitch
- Search Results: spring hanger
- Search Results: ramp gate hinge
- Search Results: trailer gate hinge
- Search Results: gate latch
- Q&A: Yoke Style Coupler Replacement for 2-5/16 Inch Hitch Ball Compatibilty
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
- Q&A: Mounting Hole Pattern For Dexter Electric Trailer Brake Assembly # K23-532-00 & K23-533-00
- Video: Ventline RV Vents and Fans BVC0573-31 Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Curt OEM 5th Wheel Hitch Legs Review
- Q&A: What Curt Q20 Legs are Compatible w/2016 Chevrolet Silverado 2500 6-1/2 Foot Bed w/Factory Rail Kit
- Shop: BOLT brand vehicle and hitch locks
- Shop: Tonneau Cover
- Q&A: Choosing the Correct Replacement Electric Brakes for 8,000 lb Axle
- Q&A: Availability of Replacement Brake Assemblies for 8k Al Ko Axle from Dexter
- Shop: Trailer Wiring
- Shop: Trailer Hitch