Is Brake Magnet Supposed to Continuously Ride on Armature Surface of Brake Drum
Question:
Is the magnet supposed to ride continuously on the armature?
asked by: Jerry L
Expert Reply:
The brake magnet can indeed be in direct contact with the armature surface of the brake drum, regardless of whether or not the magnet is energized. This doesn't present a problem unless the drum is worn and has grooves in the armature surface. Because the magnet and the armature are in contact, the grooves can transfer to the magnet, making it less effective.
This is why we recommend that folks check the armature surface of the brake drum when they replace the brake magnet. In some cases the drum can be turned if needed, but its getting more and more difficult to find shops that do that anymore. Most folks simply replace the drum.
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles - 12" - 8 on 6-1/2 - Galvanized
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 1/2" Studs - 8 on 6-1/2 - 7K
- Q&A: What Is The Difference Between The etrailer Electric Brake Kit And The Hayes/AL-KO K23-537-00?
- Q&A: Will Out of Adjustment Trailer Brakes Cause a Fault Code on the Electric Trailer Brake Controller
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 9/16" Studs - 8 on 6-1/2 - 7K
- Q&A: How To Determine The Correct Replacement Hub and Drum Assemblies For Trailer With 8 Lug Bolt Pattern
- Q&A: Braking Assembly Recommendations For A 2017 Grand Design Momentum 395M
- Q&A: Comparing etrailer and Dexter Axle 12" Electric Brake Kits
- Video: Review of Dexter Lubricants Sealants Adhesives - Multi Purpose Lithium Grease 14 OZ - DX64TR
- Video: Review of Lippert Trailer Hubs and Drums - Hub with Integrated Drum - LC53UD
- Q&A: Replacement Brakes and Hubs For Axle-Tek 12-GG Axle
- Video: Review of Hydrastar Trailer Brakes - Triple Axle Trailer Disc Brake Kit - HYD54FR
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Review of SAM Snow Plow Parts - Replacement Cutting Edge For Fisher Snow Plow - 3371301303
- Search Results: electrical connector
- Video: Bulldog Winch Electric Winch BDW30003T Review
- Video: Bulldog Winch Standard Series Winch Replacement Roller Fairlead Review
- Video: etrailer Camper Jack - Stabilizer Jack - SJ-R208 Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: nev r lube bearings
- Search Results: dexter torsion axle lift kit
- Search Results: k71~997~00
- Search Results: 22333tbn
- Search Results: k71 305 00 dexter seal