Fit and Compatibility of Upgraded Hubs on a 84 Eager Beaver 9 Ton Tri Axle Trailer

Question

Question:

Im looking for a hub and drum to replace my dayton hub on my 84 Eager Beaver 9 ton triaxle with dexter axles. It has 25580 inner bearings and 15123 outers. Id like 9/16 studs. Will a new hub with 14125a outer bearings work? Such as the 8-219-13UC3? Thanks

asked by: Alex L

0

Expert Reply:

Yes, the # 8-219-13UC3 will fit onto your 84 Eager Beaver 9 ton tri axles.

Your old outer bearing # 15123 has the same inner diameter as the # 14125a on the 9/16 stud # 8-219-13UC3 hub. Some important things to know about this new hub compared to your old ones is that the bolt pattern will change from a 6 on 5-1/2 to 8 on 6-1/2 bolt pattern. Also the bearings you will need to use will be different, even though they will both fit the spindle the new hub will require the use of the new # 14125a bearing. The outer bearing will remain the same # 25580 but you must use the # 14125a inner bearing. The larger hub and thicker studs will not increase the weight rating of your axle, so you will still be restricted to 18,000lbs on your Eager Beaver. If you were looking to increase your weight capacity you would want to upgrade to a heavier rated axle.

If you are in need of new tires and wheels to accommodate this new bolt pattern, I have linked the page of all the ones we offer for your convenience.

expert reply by: Jackie C

0

Answer 1

I'd need more info on your axles to know if the hub you mentioned would fit. Is there a sticker or label on it with any info/part numbers? Otherwise you'd have to pull off a hub to get me the dimensions of the spindle or the bearing numbers.…

view full answer...

Answer 2

I was able to cross reference the Dexter part number 031-17-02 to a #14125A bearing and part 031-030-02 to a #25580 bearing, and we do have these replacement parts with a grease seal in a complete kit for you. For a replacement bearing/race/seal kit,…

view full answer...

Answer 3

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…

view full answer...

Answer 4

To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…

view full answer...

Answer 5

You can go from a 16.5 to 16 inch trailer tire and wheel provided that the tire and wheel combos you go with have the capacity for the trailer. The highest capacity 16 inch combo that we have is going to be #TA76FR rated for 4,400 pounds at 110 psi.…

view full answer...

Answer 6

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 7

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 8

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 9

The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it won't increase the capacity of your trailer as the axle is still rated for that max capacity of 4,400 lbs. My recommendation for a…

view full answer...

Answer 10

I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…

view full answer...

Answer 11

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Fit and Compatibility of Upgraded Hubs on a 84 Eager Beaver 9 Ton Tri Axle Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching