Front Hitch Comparison for a 2016 Ford F-250 4x4

Question

Question:

I am interested in mounting a front end hitch on my 2016 Ford F250 4x4 super duty truck but I need more info. Which pre-made custom hitch receiver fits the best, what is its cost and Is it possible to have some photos of one mounted on my year or equivalent truck. thank you

asked by: Owen B

0

Expert Reply:

We have two options for front hitches for your 2016 Ford F-250 4x4, but I think the best is the Draw Tite part # 65049 as it has the best price by a large margin and has a much better price than the Curt competitor part # C31018.

The only advantage the Curt has is that you can flip the cross tube around so that you can have the hitch opening up higher or down lower. The Draw Tite keeps the hitch opening low. I attached a picture of what the hitch will look like once installed on a similar Ford truck plus an install video for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

According to Curt, their #C31078 won't fit DRW models of the 2021 F350 because all DRW models are equipped with the Diesel engine. The intercooler and associated plumbing will physically prevent the hitch from being installed. For the 2018 and…

view full answer...

Answer 2

I reached out to EcoHitch directly and confirmed that the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7904 will fit your 2020 Ford F-350 Diesel. EcoHitch informed me that they updated the EcoHitch #306-X7904 to work with both the gas and…

view full answer...

Answer 3

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 4

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

Most likely the new axle has self-adjusting brakes which when new are known for feeling pretty weak. The good news is that you can keep applying them over and over while the trailer is traveling and they will tighten and get more sensitive feeling.

view full answer...

Answer 7

I would check the magnets for wear before going on to test them with a meter. If the magnets show abnormal wear or if you can see the windings beginning to show through the friction surface of the magnet then they will need to be replaced. To further…

view full answer...

Answer 8

You can use the 8-1/4-inch overall length of the TruRyde BT8 1-1/2-inch Spindle #TRU97FR to help you determine the correct length for your axle tube. You also need to take into account the width of the tires you intend to use as these also will…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The factory trailer brake controller port on your 2021 Chevrolet Tahoe is located underneath the dash just to the left of the steering wheel. It will be taped to another harness so it may take a bit of looking to find. Keep in mind that if your Tahoe…

view full answer...

Answer 11

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 12

I do have an option for you but we have not yet gotten out hands on a 2019 Chevrolet Blazer therefore, have not had the chance to look for the brake controller wiring port either. I checked with both Tekonsha and Curt and it looks like they have not…

view full answer...

Front Hitch Comparison for a 2016 Ford F-250 4x4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching