Does HWT Aluminum Hi-Spec Series 6 Trailer Wheel # AM20455B Have Offset

Question

Question:

hello the aluminum mwheel am20455b it is 0 off set ???

asked by: Reynaldo G

0

Expert Reply:

Yes, the Aluminum Hi-Spec Series 6 Trailer Wheel # AM20455B has zero offset. Any trailer wheels that we offer will be noted as having either positive offset (wheel center moved closer to the trailer frame) or negative offset. If offset is not noted in the specs then the wheel has none. This 15 x 5 wheel accepts an ST205/75-15 trailer tire.

expert reply by: Adam R

0

Answer 1

It wouldn't be a problem for the center cap of the Aluminum Hi-Spec Series 06 Trailer Wheel #AM20455B to fit over your Bearing Buddy. The linked photo shows the rear view of this wheel with the center cap in place. The arrows show the…

view full answer...

Answer 2

Yes, the Aluminum Hi-Spec Series 6 Trailer Wheel part #AM20455 has a wheel bolt size of 1/2 inch-20 so you can use the original 1/2-20 lug nuts like part #AM90049.

view full answer...

Answer 3

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 7

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Does HWT Aluminum Hi-Spec Series 6 Trailer Wheel # AM20455B Have Offset

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching