Replacement Grease Cap Plugs, Bearings and Brakes for 2005 Big Tex 14GN Trailer

Question

Question:

Which grease cap plug do I need for my 2005 big Tex 14gn? It has 7K Dexter 8 lug axles? Also do u offer brake and bearing kits for this same axle? Thanks

asked by: Jon L

0

Expert Reply:

For a replacement rubber plug for your trailer grease caps you can use part # DC-RP from TruRyde. This fits a 1.18-inch hole in a grease cap like # RG04-040.

We do offer replacement bearings, bearing kits and brake components as well. Complete bearing kits for 7K axles can be seen on the link provided. Both use inner bearing 25580 and outer bearing 14125A. Kit # BK3-210 includes a seal with an I.D. of 2.125-inches and kit # BK3-200 uses a seal with an I.D. of 2.250-inches. Individual bearings and races are also available and can be ordered by their part numbers, such as part # 25580.

Since your Big Tex 14GN uses electric drum brakes you can use the linked page to select appropriate size brakes. For 7K axles we offer 12 x 2-inch brakes like Dexter's Nev-R-Adjust # 23-464 and # 23-465. You'll want to match up your brake mounting flange bolt pattern and to use a left-and right-hand brake on each axle.

expert reply by: Adam R

0

Answer 1

The 2-1/2" Lubed Dust Cap and Rubber Plug #DC250L-DCRP is designed to fit a 2.441" hub. You can confirm that this will fit by measuring with a Digital Caliper #PTW80157 to be sure this is the size that you need.

view full answer...

Answer 2

It sounds like your Big Tex trailer did not come with brakes. Based on this, to convert your trailer with no brakes, to adding electric brakes, on your Big Tex 35SA trailer, the first thing you need is a left and right brake kit. You could use the…

view full answer...

Answer 3

The longer 2-1/2" torx screw Item #TFX250ACQ will work the best to attach the boards to the metal frame of your Big Tex trailer when replacing the trailer deck. If you need a torx head screwdriver bit, you can use part #TX430-1.

view full answer...

Answer 4

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

The tires on your trailer should not come off the ground while leveling. It sounds like you just need to reset the zero point. In order to do this you will need to follow the steps I have attached for you below and in the photo. If this does not fix…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Replacement Grease Cap Plugs, Bearings and Brakes for 2005 Big Tex 14GN Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching