Adjusting Latch On Trailer Coupler with Trigger Latch
Question:
How do you properly adjust the hitch latch on a trigger type assembly? Is it normal to have a small amount of forward/reverse play between it and the ball? How much? Thank You
asked by: David H
Expert Reply:
To adjust the hitch latch on your trailer's coupler, you will want to adjust the nut at the bottom of the latch. This nut will be tightened or loosened depending on what you need for your coupler. I have attached a diagram showing you the location of the nut that you will want to adjust.
The ball needs to be secured in the coupler and unable to simply come off. However, there should be some room for play. The hitch ball needs to be able to move inside the coupler so that nothing binds up while you are towing. The trailer needs to be able to move and pivot while moving, so the ball should be secure, but not tight, in the coupler.
Product Page this Question was Asked From
Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 6000 lbs GTW
- 3 Inch Channel
- Trigger Latch
- Fulton
more information >
Continue Researching
- Shop: Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 3,000 lbs
- Search Results: trailer winch
- Search Results: trailer fenders
- Search Results: trailer wiring
- Search Results: bearing buddy
- Shop: Trailer Wiring
- Shop: etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.5K
- Video: etrailer Square A-Frame Jack with Footplate Review
- Q&A: How to Adjust etrailer Weld-On A-Frame 2-5/16-Inch Coupler # CA5400
- Article: Trailer Couplers
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Q&A: Replacement 7-Way for 2018 Ford F-150 and Airstream to Provide Tight Connection
- Video: CE Smith Trailer Fenders CE26065PGA Review
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB2047 Review
- Video: etrailer Round Swivel Marine Jack with Wheel Review
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR450B-400B Review
- Video: CE Smith Mounting Brackets for Trailer Fenders Installation
- Video: Fulton Trailer Fenders - Top Step - F008559 Review
- Shop: Trailer Hitch
- Article: Dielectric Grease Review
- Shop: Bulldog Round, A-Frame Jack Drop Leg and Pull Pin Assembly
- Article: Trailer Jacks
- Shop: Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K
- Shop: Optronics Mini Trailer Clearance or Side Marker Light - Submersible - Incandescent - Amber Lens
- Shop: Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
- Shop: Brake Controller
- Shop: Towing Mirrors
- Q&A: Comparing the Curt Hitch C13409 and Draw-Tite Hitch for a 2019 Subaru Forester
- Search Results: trailer light