Trailer Hitch for a 2014 BMW 328i Xdrive
Question:
Want to confirm if this will fit the 2014 328i xdrive sedan?
asked by: Scott
Expert Reply:
Curt trailer hitch # C11367 will fit your 2014 BMW 328i Xdrive as long as the car has a single muffler. If you plan on doing any towing the correct ball mount to use is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you will need to visit a BMW dealer because there are no confirmed aftermarket harness that will fit.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or car go carrier) per their warranty requirements.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does Curt Hitch part # C11367 Fit 2014 BMW 328d xDrive Wagon
- Q&A: Trailer Hitch and Wiring Fit for 2014 BMW 328d xDrive Wagon
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Will Curt Trailer Hitch C11367 Deform the Bumper Fascia of 2015 BMW 435i
- Q&A: Trailer Hitch Ground Clearance Comparison Between Curt and Eco-Hitch Installations
- Q&A: Recommended Trailer Hitch Receiver for 2016 Subaru Crosstrek
- Q&A: Bolt Size for EcoHitch 306-X7203 That Fits 2016 Subaru Crosstrek
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose a Trunk-Mounted Bike Rack
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: Trailer Hitch Receiver Sizes
- Article: What Do I Need To Tow A Trailer?