THIS ITEM IS NOT A FIT FOR
2010 Chevrolet Silverado
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 76170
Our Price: $216.94
2010 Chevrolet Silverado
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (198)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 76170
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 525 lbs TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
76170 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
Installation Details
This Product Fits The Following Vehicles
- 2018 - 2024 Honda Odyssey
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76170
Average Customer Rating: 4.7 out of 5 stars (197 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Tony11/15/2023
Great hitch! Installs exactly as described. Very clean look as it doesn’t stick out at all and is hidden well under the bumper. We use it for bike racks and cargo baskets and it’s been great. Be careful of going up steep driveways as it can drag. Can’t do much about that with such a low sitting vehicle. Would definitely recommend.
by: Gardiner A07/11/2020
2020 Honda Odyssey
After reading all of the reviews I had a high level of confidence that installing this hitch on my 2020 Honda Odyssey would be easy. Install time took about an hour and a half, and was indeed incredibly easy thanks to the video. I used a bungee cord to hold up the exhaust and a utility knife with a new blade to cut all of the plastic including the notch for the hitch. Since there is so much room underneath the car, I used my jack stands to hold the hitch up while putting the first screws in, no second pair of hands needed. It looks fantastic and doing it myself instead of paying the dealership felt great. You really do get what you pay for!
by: John01/02/2020
2018 Honda Odyssey
Installed the product 1 year after acquiring it on my 2018 Odyssey- It was a snap, no need to put the car on a lift and only removed the last muffler hangar. A second hand is helpful when installing and re-hanging the bumper. Otherwise its a one person Job. Fits great- very sleek hidden hitch. Wiring kit also installed just fine for the 4 flat. Instructional videos was super helpful and paper instructions were nearly adequate in themselves after watching video.
John
1/3/2021
Super Hitch on the Odyssey - towing fishing boat perfectly all last summer.
by: Donald03/02/2020
Honda Odyssey
Had a friend come over and it took less than an hour. Most of that time was spent removing and reinstalling all the clips and screws for the bumper cover and rear wheel splash guards. Video made it seem easy. Definitely glad I decided to go with this model hitch as it looks like a factory install. When I purchased the 2020 Odyssey in December I had the dealership give me quote and they wanted right at $1200 to do what etrailer allowed me to for $xx.xx. Thanks for saving me the $1000 and having the satisfaction of doing it with my buddy and the expert help from etrailer.
Donald
3/3/2021
As Tony the Tiger says, “Grrreat! Still very satisfied with the hitch and wiring harness.
by: Blake Longhurst10/27/2023
2018 Honda Odyssey
The Draw-Tite Max-Frame Trailer Hitch Receiver did not disappoint at all. First thing, the shipping on this was extremely fast. Not sure if that was because of where I live or not, but it got delivered in great condition and was very quick to get here.
Second, the installation seemed daunting at first but after watching the video for the 2018 Honda Odyssey, the installation was smooth as butter. Hardest part for me was removing the clips on the bumper so that I could reuse them again. They were very dirty and didn't want to budge very easily. Other than the clips, everything else for the installation was super easy. I do recommend trying to clean out the welded nuts like they mention in the video though, I had two of mine that were a little rough to get the bolt to screw in without the help of a ratchet, so clean those out beforehand and you'll be good.
Third, The look of this receiver once it's all said and done looks great. It's not quite the same as the factory hitch, but it's nice and sleek but still functional. We immediately threw in our Velocirax bike rack to try it out and it worked like awesome. I would definitely recommend this hitch to any other Odyssey owner.
by: JeffT02/11/2024
2018 Honda Odyssey
I installed this Draw-Tite hitch receiver on my 2018 Honda Odyssey by myself. I don't normally do any work on my own car, so I was a bit nervous about doing it. I watched the etrailer videos and looked a few things up that I didn't understand. It was all pretty clear, so went for it. Since I am a newby,the 80-min install took me 3 hours, since I had to go back to videos and try things a couple times. If the videos had not been available, I would have paid a local shop to get this done.
THe only reason for giving a 4-star rating instead of 5, is that the bottom of the receiver had a pretty serious burr that happened after its coating was already done.
by: Tom P.04/06/2021
2018 Honda Odyssey
Great looking trailer. I bought this one because the bars weren't extending off the side of the hitch.
Installation is straightforward and the video is great. Lessons learned:
1) I didn't need to take off the forward gasket for the exhaust pipe; I only took off the rear one; photo attached showing how my ratchet fit between tail pipe and bolt.
2) the HARDEST PART of the installation procedure was REATTACHING THE SPLASH GUARDS/MUD GUARDS. I found that it helps to understand what clips and grommets are there.
3) I used a file to de-burr the edges after cutting with my Dremel. I like to avoid sharp knives whenever possible.
My hitch came with some paint missing in some parts so I spray painted the surfaces black and gave it a couple hours before handling.
It wasn't clear to me from the video why you need a new cable for the Hands Free Tailgate Assist. The manual that comes with the cable makes it very clear: you will not be able to kick under the hitch anymore to open the trunk/hatch. Pic of manual attached.
Lastly, maybe stretch before installing this. I was sore for a couple days afterwards and took some Advil.
by: Tsu01/16/2021
2020 Honda Odyssey
Nice trailer hitch for the 2020 Honda Odyssey. That said build quality could be better, there were some minor defects on the bumper, there were some super sharp edges that cut me. I had to file it down and paint it.
Installation wasn't too bad, the hardest part was unhitching the exhaust so that you get more room to work with. Installation videos on etrailer.com website made the install a breeze.
Note for the plastic retaining clips you need to remove under the bumper, you only need to remove 7 of them (don't remove all of them, as there are there to actually keep the handsfree tailgate antenna inside the bumper)
by: Mete04/10/2023
2018 Honda Odyssey
It was a smooth installation. etrailer video is super helpful. Just followed the video, that's all you need. Thanks etrailer.
by: Scott 04/14/2024
2019 Honda Odyssey
Fit my 2019 Honda Odyssey perfectly. The instructions leave a little to be desired, but the video etrailer provides is thorough.
by: Kevin10/11/2021
2022 Honda Odyssey
The hitch is built well. The only reason that I gave it 4 stars instead of 5 is because the powder coating was already flaking off in a few spots. The install isn't really that difficult. The only tip I guess I would say is make sure you measure well before you cut.
Heather A.
10/13/2021
I will have customer service reach out to you about the paint flaking. I do recommend to cover those spots in a rust-oleum type of paint to prevent rust in the future. I have attached a helpful article for your reference.
by: Andy09/18/2022
Easy to install and great instructions from etrailer.com.
Unfortunately, the receiver tube is welded on crooked when compared to the hitch itself, resulting in bike racks and luggage racks being tilted when compared to the van and the ground. I’d expect more quality from a company like Draw-Tite.
As you can see in etrailer’s pictures, the receiver tube is set inward from the back edge of the bumper, this may make using this hitch more difficult for some users as it is a bit more difficult to hook up safety chains and the hitch pin.
by: Matt02/29/2024
easy to install but was a little scratched when it got here which is why I gave it 4 stars. I really like that most of the hitch is hidden.
by: Paul05/24/2022
The idea of putting the hitch on was far more daunting than it actually was. The only difficulty was cleaning the attach points of rust to make sure that the bolts threaded correctly.
by: David 12/07/2023
2023 Honda Odyssey
Looks great on the van. All you see is the receiver. My wife hates bumping her leg on a receiver but that is not an issue with this one. It fits just under the bumper. Easier to install than I thought it would be.
by: Jason08/09/2019
2019 Honda Odyssey
The auto body portion was simple to remove the bumper skin. The instructions recommended lowering the exhaust, I was able to avoid that and actually found it helpful to slide the assembly over the tail pipe to support one side while I started the left side bolts. Torquing the right side bolts was the crux of skipping dropping the exhaust. To dodge that bullet I simply wedged a block of wood between the body and exhaust to make enough clearance for the ratchet head and socket. Overall I'm very happy with the build and fit. It's a much cleaner look than a huge hanging bar. The only thing that broke my heart was cutting a index card size notch in the bumper skin.
Jason
8/10/2020
Its been awesome, looks great. Hauled trailer twice from Texas to CA worked out perfectly. Im very impressed with the product and how it offers more ground clearance than a below bumper unit.
by: Tom 02/10/2024
2022 Honda Odyssey
Excellent video on installation. This was very helpful
by: Matt08/04/2022
Haven't used it yet, but the fit is great.
Install took about 1.5 hours taking my time and did it all on the ground. I drove the van up on a couple of 2x6's for a little more room underneath. The installation video is dead on, I only took the rearmost exhaust hangar off though.
Overall very pleased and can't wait to put our cargo carrier on and put it to use.
Also great service from etrailer like always.
by: James06/21/2023
The detailed videos made the installation easy. I’m super pleased with my purchases. Looks great.
by: Richard02/10/2024
2018 Honda Odyssey
The order came in however the package was damaged very badly. I may be reaching out requesting a refund considering the damager to the product.
Jenny N.
2/16/2024
Oh no! We can take care of that for you. I will have Customer Service reach out to you.
by: JD09/05/2022
Easy install. Great look compared to most other alternatives that also provides more clearance.
Jd
9/7/2023
Ive had this and been using it for a year. I still think its the best looking hitch receiver frame with the best ground clearance. It wasnt too difficult of an install, though some technical tasks required, and still looks great.
by: Cameron04/05/2024
Easy to install, matched up with van existing threads. Thank You
by: Steve S.06/07/2020
Hitch came on time and well packaged to protect it from scratches / damage. After watching etrailer’s video, I set aside a few hours to take my time to install. Everything went as planned. Was able to install without jacking up the van. I did use a floor jack and two car stands to position the hitch under the van so I could thread the first couple bolts. A little nervous to cut the bumper but use of my dremel with cutting disk worked great. Overall very happy with the finished look.
by: Al10/15/2022
2019 Honda Odyssey
Installed myself on a 2019 Honda Odyssey - took about 2.5 hrs. I'm relatively handy with tools and working on cars (you will have to remove your bumper and measure & cut a slot in the bottom center of it for the hitch receiver to poke through). However, once installed, its almost not noticeable, and my wife appreciates the hidden aspect of it. We use it primarily for bike rack, but there are cargo racks, pods, steps to access roof racks, and obviously trailers could be attached to it. Very handy.
25
198
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Recommended Trailer Hitch Receiver & Wiring Harness for 2020 Honda Odyssey with Hands Free LiftgateThe Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76170 and the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7372 are equally good quality and will allow the hands free liftgate sensors to be used without issue on either side of the center receiver tube. The hidden crossbar design makes either a great option. The biggest difference between these two is the EcoHitch uses recycled material where the Draw-Tite does not. Both are...
view full answer... - Hitch with Best Ground Clearance on a 2019 Honda OdysseyI went out to the warehouse and took some measurements of the three hitches you mentioned for your 2019 Honda Odyssey and from what I find the # 76170 hitch actually has about a 1/4 inch less ground clearance than the # C13370. The # 76170 is actually a much different design than the other hitch since the receiver tube is under the crosstube. This makes less of the hitch visible under the van's bumper which is the style I like to recommend. I like when all you see under the rear bumper...
view full answer...
- Difference Between Draw Tite Hitches that Fit 2020 Honda OdysseyFor your 2020 Honda Odyssey the big difference between the two Draw Tite hitches you mentioned is that the # 76171 has a visible crosstube and the # 76170 does not. Having the crosstube out of plainsight makes the hitch look a little better and also helps with ground clearance. Now the install of the the hidden hitch is a bit longer but if you can handle that aspect it would be the hitch I'd recommend the highest. I attached a picture of what this hitch looks like installed as well as a...
view full answer...
- Trailer Hitch Recommendation for 2018 Honda Odyssey for Carrying Bike RackI'd be happy to help you pick out the best hitch for your 2018 Honda Odyssey to carry the Thule Hitching Post Pro Item # TH934XTR, which is a great bike rack by the way. I'd highly recommend the Draw Tite part # 76170 as it's the most hidden option as it only has the hitch opening hanging below the rear bumper which also helps with ground clearance. The other hitches you mentioned aren't terrible options at all but with a lower vehicle like yours I'd know you'd be happier with the Draw Tite.
view full answer... - Comparing the Tongue Weight Ratings of the Draw-Tite Hitches for a 2018 Honda OdysseyThe Draw-Tite Max-Frame Trailer Hitch Receiver part # 76170 which is a fit for a 2018 Honda Odyssey has a 525 lb tongue weight rating as you mentioned. Therefore, so long as you do exceed this rating then you will not have any issues with the trailer hitch deforming. If anything were to happen, you would be covered under warranty. The trailer hitch testing procedures are carried out by the manufacturers and must follow strict federal guidelines.
view full answer... - Trailer Hitch and Wiring Recommendation for 2018 Honda OdysseyI wish that was something we had, but since hitch installs for vehicles like your 2018 Honda Odyssey are relatively very simple for mechanics we have had the best luck telling people to find a local garage with a good reputation and let them handle the install. For your vehicle the Draw Tite part # 76170 would be a great solution that we would recommend highly. It has the best capacities, price and installs very simply. I attached an install video as well. For trailer wiring you'd then...
view full answer... - Most Hidden Trailer Hitch that Fits 2023 Honda Odyssey TouringThe Draw Tite part # 76170 that fits your 2023 Honda Odyssey Touring has only the hitch opening that hangs below the rear bumper of your vehicle so it would be a really great option that is more discreet and have better ground clearance. Or if you wanted the most hidden option you'd want the Hidden Hitch part # DT76GR which has a removable hitch opening so when not in use would be completely hidden.
view full answer... - Trailer Hitch Recommendation for 2018 Honda Odyssey Touring for Bike RackThe best hitch for carrying a bike rack with your 2018 Honda Odyssey is going to be the Draw Tite hitch part # 76170 which is a 2 inch hitch with a concealed crosstube. It has plenty of capacity and is mostly hidden too which makes it look nicer as well. I attached a picture of what it looks like installed plus an install video link to this page as well. I really like the Saris Freedom Superclamp part # SA4025F. This is a lightweight platform rack (which is normally an unheard of combo)....
view full answer...
- 2020 Honda Odyssey Trailer Hitch Receiver Hands Free Lift Gate CompatibilityIf you have the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12175 or the 2 inch Class III # C13370, then the description on the page says "Hands-free Liftgate sensor areas may be limited to areas away from the center where hitch receiver opening is located." If your sensors are not working at all, then I recommend checking the sensor connections as they should work as you get close to that sensor. You do have the option of relocating the sensors if the crosstube covers...
view full answer... - Install Video and Instructions for Draw Tite Hitch for 2019 Honda OdysseyFor the Draw Tite # 76170 which is a custom fit for your 2019 Honda Odyssey I attached a link to an install video and a link to the printed install instructions as well.
view full answer...
- Trailer Hitch and Wiring Recommendation for 2020 Honda OdysseyThe hitch I recommend for your 2020 Honda Odyssey is the Draw Tite part # 76170 as it has plenty of towing capacity and has a concealed cross tube which gives it the most hidden look. This also helps with ground clearance as well. Check out the install video and picture I attached for more info as well. Then for trailer wiring the Tekonsha kit part # 118781 installs very easily and also comes with a very reliable converter box as well. I attached an install video for this for you to check...
view full answer...
- Trailer Hitch Receiver For 2022 Honda Odyssey With Best ClearancesWe have installed all three of those trailer hitches on a 2022 Honda Odyssey, and we found that two of them were tied for the best bumper clearance - 3 inches from hitch pin hole to edge of bumper (see photo below). Those two hitches are the Curt and etrailer options: - etrailer Trailer Hitch Receiver # e98855 - Curt Trailer Hitch Receiver # C13370 In regard to the Curt # C13370 and etrailer # e98855, these are the same hitch but for their different powder coat. The Curt hitch has a...
view full answer...
- Comparing Curt and Draw-Tite Trailer Hitches For 2022 Honda OdysseyFor your 2022 Honda Odyssey I recommend going with the Draw-Tite # 76170 over the Curt # C13370 due to the Draw-Tite hitch having a hidden crosstube meaning once installed the only visible portion of the hitch will be the receiver as shown in the included picture. The Draw-Tite and Curt hitch both have the same 525lb tongue weight rating and 3,500lb trailer weight rating so really there is no down side with going with the less visible hitch, and it will keep a more factory look to the...
view full answer...
- Trailer Hitch Recommendation for 2022 Honda Odyssey for Cargo Carrier and Bike RackFor your 2022 Honda Odyssey the Draw Tite hitch part # 76170 is a really great option for both a cargo carrier and a bike rack. It's the 2 inch hitch size that most carriers and racks are made for, is mostly hidden, and also has great weight capacities. It would also be a great option for a bike rack like the Hollywood Racks Trail Rider # HR200Z which is a really solid bike rack that is also very easy to load. I attached an install video for this hitch for you to check out as well.
view full answer... - Recommended Concealed Hitch and Wiring for 2022 Honda OdysseyFor your 2022 Honda Odyssey I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit # 76170. From what we have found this hitch is the least visible. It has a concealed cross tube so you will only see the receiver hanging down below the bumper, giving it a factory look. For your wiring, the Tekonsha T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat # 118781 is the best choice. The T-One connector plugs directly into existing wiring...
view full answer... - How Difficult is the Installation of the Draw-Tite Hitch # 76170 on a 2018 Honda OdysseyUsing a lift does make installation much easier, but it is not necessary when installing the Draw-Tite Hitch # 76170 on your 2018 Honda Odyssey. Although it is not required, I recommend using a floor jack when installing this hitch. Using a floor jack and jack stands, like # PTW1605, will allow you to raise the vehicle up off the ground to provide more clearance to install the trailer hitch. Be sure you follow all instructions and safety procedures when using a jack and jack stands. If...
view full answer... - Recommended 4-Bike Platform Rack That Clears 2018 Honda Odyssey with Draw-Tite Hitch FoldedThe Draw-Tite Trailer Hitch Receiver part # 76170 for a 2018 Honda Odyssey will require more than 4-1/2" from the center of the hitch pin hole to the closest part of the rack while folded up so the Swagman XTC4 4-Bike Rack part # S64665 won't work as it only has 3-1/2". Instead, the Hollywood Racks Destination 4 Bike Platform Rack part # HR4000 is what I recommend as it's the next most cost effective option that will clear while folded up.
view full answer... - 2020 Honda Odyssey Hitch With Best Ground ClearanceThe trailer hitch with the most ground clearance for your 2020 Honda Odyssey is the Draw-Tite trailer hitch part # 76170. The receiver tube is the only thing visible once it is installed, so it gives you additional clearance and a cleaner look. The top of the receiver tube is roughly 14 1/2" off the ground, where most of the hitches with visible cross tubes are 12 1/2" off the ground, so you gain an additional 2 inches of clearance. There are additional steps involved to install this...
view full answer...
- Comparison of Curt 13370 and Draw-Tite 76170 Trailer Hitch for 2022 Honda OdysseyThe Curt Trailer Hitch Receiver # C13370 and Draw-Tite Trailer Hitch receiver # 76170 are both good choices for your 2022 Honda Odyssey. They are both Class III hitches with a tongue weight capacity of 525 lbs, which will be the maximum they can hold with your cargo carrier. There are, however, a few differences. The main advantage I see to the Curt is the ease of installation. The installation process for the Draw-Tite hitch will take far more time since it is more difficult. This may...
view full answer... - Trailer Hitch Recommendation for Best Ground Clearance on a 2020 Honda OdysseyThank you for all of the details and congrats on the purchase of your new 2020 Honda Odyssey! Since your main concern is ground clearance I recommend going with the Draw-Tite Max-Frame Trailer Hitch # 76170 because it has a concealed cross tube which means on the hitch receiver itself is visible. This eliminates the cross tube sitting lower than the bumper out towards the corners of your vehicle which can potentially make contact with the ground when turning and going uphill (like with...
view full answer...
- Recommended Trailer Hitch and Wiring Harness For 2022 Honda Odyssey w/ Hands Free Lift Gate SensorFor your 2022 Honda Odyssey I recommend the Draw-Tite Trailer Hitch Receiver # 76170 due to its hidden crosstube design meaning once installed the only visible part of the hitch will be the receiver itself as shown in the included picture, but also due to its 525lb tongue weight and 3,500lb trailer weight rating that aligns perfectly with the max towing capacity of your vehicle. This hitch will work perfectly with your hands free lift gate sensor, you will just need to place your foot...
view full answer...
- Comparing Draw-Tite Trailer Hitches for the 2018 Honda OdysseyThe single biggest difference between Draw-Tite trailer hitch # 76170 and the etrailer hitch # e98855 for the 2018 Honda Odyssey is visibility. With Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 76170, which is the one I recommend, only the receiver will be visible. If you want the most hidden trailer hitch for your van this is the best option. Compare that to etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98855...
view full answer...
- Trailer Hitch and Wiring Recommendation for 2020 Honda OdysseyThe best hitch option we have for your 2020 Honda Odyssey is the Draw Tite hitch part # 76170 as it has the best towing capacities, is a 2 inch hitch which means accessories and ball mounts are easier to come by since this is the most popular size, and because only the hitch opening hangs below the rear bumper of the vehicle which gives it a more concealed look! See attached picture and review video as well. For trailer wiring then you'd want the Tekonsha kit part # 118781 which is very...
view full answer...
- Are All Trailer Hitches for 2019 Honda Odyssey Compatible with Weight Distribution Systems?Great question. Not all of our hitches for your 2019 Honda Odyssey are rated for use with weight distribution. The highest rated hitch we have for your vehicle with weight distribution compatibility is the etrailer hitch # e98855. This hitch has a rating of 525 lbs tongue weight and up to 5,000 lbs towing when using weight distribution. This hitch is clean looking, but the hidden crossbar hitches like # 76170 for your vehicle are not compatible with weight distribution. This is a...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Ethan H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Gardiner A.
7/12/2021
Zero issues a year later. 1,000 recommend.